You are reading the article Take Better Screenshots In Ubuntu With Flameshot updated in November 2023 on the website Tai-facebook.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Take Better Screenshots In Ubuntu With Flameshot
Taking a screenshot in Ubuntu isn’t a tough thing to do (unless you want to take a screenshot of your login screen). It’s as simple as pressing the “Print Screen” button. Simple doesn’t necessarily mean the best, though. Yes, it’s easy, but the built-in screenshot functionality doesn’t exactly offer a lot of options.
If you take your screenshots seriously, you might need something more. Flameshot is a relatively new utility that lets you do a whole lot more with your screenshots. Powerful though it may be, Flameshot is also quite simple to install and use.
Installing FlameshotFirst things first: you’ll need to install Flameshot. Fortunately, it’s one of the easiest install processes you’ll encounter. Simply open up the terminal and type:
sudo
apt
install
flameshotIf you prefer a more visual way of installing the application, you can search for it in the Software Center.
After you enter the command, just wait a few moments for Flameshot and its various dependencies to install.
Even if you’re not on Ubuntu, the installation process is still easy. We’re not going to cover the steps for each distribution here but fear not. Instructions for installing on most popular distros are available on the Flameshot website.
Using FlameshotOnce the app is installed, you’re ready to go. There are two ways to use the app, depending on whether you prefer a GUI or the command line.
Using Flameshot in GUI modeAs the help message will explain, you can select a portion of the screen to take a screenshot of. You’re not limited to one shot. Once you’ve got a selection, you can refine it by dragging the different corners.
Once you’ve got your selection, a handy assortment of tools is available. You can annotate the screenshot with arrows, draw on it, or blur out sections. This is great if you want to keep sensitive information out of a screenshot.
Once you’ve finished marking up your screenshot, you can save it. You can also copy it to the clipboard or open it directly in another application.
Using Flameshot from the command lineIf you’re more comfortable with the terminal, Flameshot’s command line mode is plenty full featured. This is also handy if you don’t want the app running in your tray constantly.
The command flameshot full will take a screenshot of the entire desktop, then ask you where to save it.
If you’d rather copy to the clipboard, you can do this with flameshot full -c.
If you need some setup time, flameshot full -c -d 5000 will take a screenshot after 5 seconds.
To save it to your desktop, use flameshot full -p ~/Desktop -d 5000.
You can also get the best of both worlds. Using flameshot gui will launch the same interface that the full GUI version of the app uses. The difference is that this way the app doesn’t need to run in the tray.
Configuring FlameshotWhile the app is ready to go as soon as you install it, you might want to tweak the configuration. Either type flameshot config or select Configuration from the tray icon menu.
Options you can set include whether to show the tray icon or if you want Flameshot to launch at startup. You can also select what buttons are shown in the GUI and what color you want the interface to be.
Overriding the Print Screen buttonOne thing you can’t set in the Flameshot configuration is to use the Print Screen button to take a screenshot. The wording on the Flameshot website seems to indicate that the app will eventually add this functionality. For now, you can override the Print Screen shortcut yourself.
Open the system settings app, select Devices, then go to Keyboard. Scroll down to Screenshots. Select “Save a screenshot to Pictures” and hit Delete to disable the shortcut. Then scroll all the way to the bottom and hit the plus button. Here, give it a name and type the Flameshot command you want to bind to the shortcut. Then set the shortcut as Print Screen and you’re done.
ConclusionNot everyone needs a powerful screenshot tool like Flameshot, but there are plenty of reasons to keep it installed. Detailed screenshots are great for reporting bugs or presenting problems you may be having when you’re looking for help. Using Flameshot is a much easier option than taking a fullscreen screenshot and editing the resulting image in GIMP. It’s worth keeping around for that reason alone.
Kris Wouk
Kris Wouk is a writer, musician, and whatever it’s called when someone makes videos for the web.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
You're reading Take Better Screenshots In Ubuntu With Flameshot
How To Take Screenshots In Microsoft Edge. Screenshot Pages In Microsoft Edge.
If you have been using Microsoft Edge since it was first released, you’ve probably had to install a third-party extension to manage the process of taking screenshots. Although this is a decent enough way to capture screenshots in Edge, extensions use a fair amount of system resources. So follow along as we show you how to use native screenshot capture in Edge.
How to stop recent items appearing in Search on Windows 10. Hide recent items in Search.
The latest version of Microsoft Edge running on the Chromium engine has been out for well over a year now and has gained a lot of traction in the browser space. It’s sleek, easy to use, resource-friendly and has a lot of common features that make its cousin Google Chrome so popular. That said, Edge has always had a few key features missing from its initial offering, native screenshot capture being one of them.
Although it has always been possible to download a third-party screenshot capture tool to take screenshots, it’s always best to avoid extensions if you can, as they are an added resource drain on the browser. Either way, Edge has now gained support so follow along as we show you how to start using screenshot capture.
Related: How to turn on tab scrolling in Google Chrome. Change tabs using your mouse wheel in Chrome.
How do you take screenshots using Microsoft Edge? Take screenshots in Edge without using extensions.At this stage, the screenshot feature for Microsoft Edge is just passing through the Canary and Dev builds of the browser so you won’t yet have access to it if you are using the stable release. But it won’t be all that far away from a full release. So it’s still a good idea to find out where you’ll be able to access it.
To begin, make sure your version of Edge is the latest, then do the following.
Open a website on Microsoft Edge. (any will do)
Select the Web capture option.
Now use your mouse to select the region of the web page you want to capture. If you want to capture a large area scroll down the page.
Just like all the other screenshot tools on the market, including the build-in ones, it may take a little experience to get used to using the full scrolling feature. I know sometimes the Firefox version can be a little temperamental at times and Edge is the same. Anyway, that wraps up this guide, if you don’t see the feature in your version of Edge, you’ll need to update or wait till it has been released to the stable version.
On a side note…If you are looking for some more interesting Microsoft Edge content, make sure you check out the following article which will guide you through the process of turning on or off Tab Previews. Tab Previews allow you to preview the contents of browser tabs in small windows before you switch to them fully. A feature of Google Chrome that has finally made its appearance on Edge.
How to turn on Tab Previews in Microsoft Edge. (Enable Tab Previews Microsoft Edge)
4 Great Ways To Take And Edit Screenshots In Google Chrome
Taking screenshots or even when sharing a webpage with some of your friends, can be time-consuming and can slow you down. First, you search your desktop to find the screenshot you’ve just taken, then you crop it, and finally, you search for a reliable image host.
The good thing is, these problems can be easily solved by an browser application. You can snap and annotate screen snapshots without ever leaving your browser by using the Chrome extensions discussed below. And with one of these tools, you can even take screenshots from your desktop and other applications.
1. PixlrPixlr Editor is a full-featured in-browser photo editing app that you can use to edit image files while they still reside in Google Drive. And if you have synced your Drive files across various computers, whatever editing you do on one will automatically appear on another system. Now, that’s one productivity increase I can get behind. One of the best Chrome extensions out there, we definitely recommend you give this one a try. Once installed, be sure to restart Chrome once to get the full features of the app.
2. Awesome ScreenshotAwesome Screenshot is just one of the best in-browser screen snapshots alternatives available today, and one that we’re quite fond of using here ourselves at Make Tech Easier. You can choose either to capture the entire webpage, or just the part that is currently visible in your browser. By resizing your browser window, you can actually dynamically crop your screenshots before they’re taken.
You can also use the extension for some basic editing once you’ve snapped your webpage – ideal for bloggers and amateur annotation. Furthermore, you can resize or further crop your screenshot, and improve the image quality or compress for web viewing. Annotations consist of basic circles, rectangles, lines, freeform and/or text on top of the screenshot. More importantly, the special blur tool allows you to quickly blur out parts of the screenshot , perfect for obscuring personal details.
3. LightShot (Windows only) 4. Webpage ScreenshotShujaa Imran
Shujaa Imran is MakeTechEasier’s resident Mac tutorial writer. He’s currently training to follow his other passion become a commercial pilot. You can check his content out on Youtube
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
How To Take Screenshots On Iphone X, Iphone Xr, Xs, And Iphone Xs Max
Want to take a screenshot of iPhone X, iPhone XR, iPhone XS, or iPhone XS Max? Of course you can snap screenshots of iPhone X-series, but you’ve undoubtedly noticed by now that iPhone X line has no Home button, and thus the familiar screenshot method pressing the Home Button and the Power Button no longer works to capture the screen of iPhone X, XR, XS, XS max.
Instead, the iPhone X, XS, XR uses a new and different button pressing combination to snap screenshots. It’s equally simple as what you used to use for snapping screen captures of iOS devices, but because it’s entirely new it may take a bit of getting used to before the new screenshot method becomes habit for iPhone X series owners.
You might want to practice it a few times to get the hang of it.
How to Screenshot iPhone X, iPhone XR, iPhone XS, iPhone XS Max
Press Volume Up button and Power button together at the same time
You must press the Volume Up button and Power button concurrently to take a screenshot of iPhone X, XR, XS. When the screenshot is successful, you will hear the familiar shutter camera sound, then see a little thumbnail of the screenshot preview appear in the bottom left corner of the screen.
The Power button is on the right side of the iPhone X, XS, XR, and the Volume Up button is the topmost button on the left side of iPhone X, XR, XS (it’s the button, not the little mute switch).
Some people refer to the Power button as the Side button or the Lock button, whatever you want to call the button the functionality is the same and it is a required step for taking a screenshot on iPhone X, iPhone XR, or iPhone XS.
A quick warning: do not HOLD the Power button and Volume Up button for too long, because it will quickly attempt to trigger the Shutdown screen and the Emergency SOS feature. When held too long, Emergency SOS will go a step further and then activate and attempt to call local authorities and emergency services, which is likely not what you want to do if you’re simply trying to take a screenshot. So beware of how that. Just a quick simple concurrent press of Power and Volume Up will snap the screenshot without doing anything else.
Notice while still using a dual button press procedure, this is different from screenshotting iPad or screenshotting iPhone models prior to iPhone X. It’s also worth noting that the process of taking screenshots with iOS 11, iOS 10, iPhone 7, iPhone 8, or iPhone 8 Plus was adjusted ever so slightly (at least in perception which required a minor behavior adjustment for some users) but remained the same with Home button and Power button pressing, whereas iPhone X, XR, XS is completely new behavior with a new button press.
And in case you were wondering, screenshots from iPhone X and newer are a substantial resolution of 1125 x 2436 pixels, making a large and tall image.
Enjoy taking your screen shots with iPhone X, iPhone XR, iPhone XS, iPhone XS Max, and you can check out more screenshot tips here if you’re interested in the topic.
Related
How To Dual Boot Asus Transformer With Ubuntu
I got myself a Asus Transformer tablet in June 2011 and since then, I have been looking for an easy way to install Ubuntu on it. The form factor, the keyboard dock and the hardware spec of Asus transformer make it just right for a portable computer. However, back then, getting Ubuntu on board the device is not easy and requires lot of hacking and scripting.
Recently, I re-checked the XDA-Developers forum again and found that someone has created a super-easy way to create a dualboot system. I tried it and it works! Here’s what I did:.
Disclaimer: This tutorial will format your tablet hard disk and wipe out all your data. It could also brick your tablet. It would definitely void your warranty. MakeTechEasier will not be held responsible for any damage, data loss, fire or death of a loved one resulting from using this mod for your device.
2. This tutorial only works for Asus Transformer with SBKv1. If your device is running SBKv2. This tutorial is not for you. Here’s how to check if your device is running SBKv1 or SBKv2.
Download sbkcheck.tar
Extract the tar file. Open a terminal and cd to the sbkcheck folder
Put your Asus Transformer to APX mode. To do that, first power off the device. Power on the device again. When you see the Asus EeePad splash screen, press the “Power + Vol up” buttons. When the screen goes black, and remain black, you are in APX mode. Once it is in APX mode, connect the device, via USB to your computer
Back in the terminal, run the command:
sudo
./
sbkcheckIt should return a message whether your device is running SBKv1 or SBKv2. As a general guide, if you bought your Asus Transformer after Aug 2011, most probably it is running SBKv2.
3. The Asus Transformer mentioned in this article is the 1st gen Asus Transformer, not the quad-core Transformer Prime.
Backing up your dataThere are a few ways to backup your data. You can either:
1. download a file manager app from market. Use the file manager to transfer important files to the external SD card.
2. Sync your emails, contacts, calendar, files with Google and Dropbox. Even if your device is wiped, your data is still intact in the cloud.
Now that you have verify the SBK version and backed up your data, here the exact steps to create a dual-boot system:
1. Download OLiFE Prime.
2. Extract the file (DO NOT extract the files on a windows type filesystem such as NTFS or FAT or you will run into problems. Do it all inside your linux partition).
3. Open a terminal and cd to the OLiFE directory. Run
sh
chúng tôi will see an agreement page. Read it carefully. Once done, type “understood” and press Enter.
4. In the next screen, press ‘2’ to select the flash device option
5. Now, it will show you the different option to flash the device. Regardless what your intention is, choose ‘1’ to dualboot.
6. Choose ‘1’ to select the Android as the default OS. Ubuntu as the default doesn’t work.
7. Put your device in APX mode and connect it to the computer via USB. The script will now format your device, partition the hard drive and copy the ubuntu and Android img over. This will take a long time, so go grab yourself a coffee and relax.
8. Once it is done, your device will restart and boot into your Android OS.
Installing UbuntuNow that the chúng tôi is copied over to your device, it is time to install it.
1. Power off your device. Press “Power + Volume Down” button until the splash screen comes alive. At the top, you should see a message asking you to press the “Volume Up” button. Release the “Power + Volume Down” button and press “Volume Up” button. This will boot into the Ubuntu installer (this is also the way to boot into Ubuntu in the future).
2. Once you reach the Ubuntu main screen, proceed on to install Ubuntu (make sure your device is connected to the keyboard dock).
If you don’t have the keyboard dock, connect it to the computer via USB again. On your Linux computer, in the terminal, run the command:
sh
chúng tôi time, press ‘5’ to select the “Onscreen keyboard”. You should now see the onscreen keyboard appear on your Ubuntu screen.
3. Proceed with the Ubuntu installation. If everything goes well, you should have a dual OS tablet now.
Post install configurationEverything works out of the box for Ubuntu on Asus Transformer, however, the Unity desktop is taking up a lot of resources, causing the system to run very slowly. What I did is to open the Ubuntu Software Center and install LXDE – a lightweight desktop manager. Once I switched to LXDE, everything runs smoothly and quickly.
Inject bluetooth firmware
The bluetooth firmware is not included in the Ubuntu installer due to licensing issue. Here’s how you can get bluetooth working on Ubuntu.
Connect the device to your computer again and run the OLiFE script. This time, press ‘4’ to select “Inject Firmware”.
Press ‘1’ to select the Default Install.
When prompted which firmware to inject, select either one will do.
That’s it. Enjoy!
Damien
Damien Oh started writing tech articles since 2007 and has over 10 years of experience in the tech industry. He is proficient in Windows, Linux, Mac, Android and iOS, and worked as a part time WordPress Developer. He is currently the owner and Editor-in-Chief of Make Tech Easier.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
How To Change Your Console Fonts In Ubuntu
Note: the font used in the console is monospaced and is not the same as the ttf, otf fonts that we used for document and browsers. In addition, there is also a limited selection fonts that you can choose from.
Changing the console font is very easy. Here is what you need to do. Open a terminal and type:
sudo
dpkg-reconfigure console-setupYou will see this:
Press “Enter” to select the default.
Next, it will ask you for the character set the console should support. Similarly, press “Enter” to select the default.
The next screen is the one that is most important to you – changing the font used in the console. There are only a few choices: VGA, Fixed, Terminus, TerminusBold and TerminusBoldVGA. Fixed seems to have the best coverage for international scripts while Terminus is the most pleasing to the eyes. Make your choice with the arrow up/down key and press Enter.
Lastly, you can set the font size used in the console. The default is 16, but you can change it to a bigger or smaller font size.
To see the font change in action, you have to open a virtual console (not to be confused with the terminal).
1. Press “Alt + Ctrl + F1” on your keyboard. The virtual console should open full screen. Login with your username and password.
2. Once you are logged into the console, type:
setupcon3. You should see the font change immediately.
4. To get out of the console, press “Alt + Ctrl + F7” on your keyboard. This will return you to the desktop.
That’s it.
Damien
Damien Oh started writing tech articles since 2007 and has over 10 years of experience in the tech industry. He is proficient in Windows, Linux, Mac, Android and iOS, and worked as a part time WordPress Developer. He is currently the owner and Editor-in-Chief of Make Tech Easier.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
Update the detailed information about Take Better Screenshots In Ubuntu With Flameshot on the Tai-facebook.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!