Trending December 2023 # Network Protocol Missing In Windows 10/11 # Suggested January 2024 # Top 17 Popular

You are reading the article Network Protocol Missing In Windows 10/11 updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Network Protocol Missing In Windows 10/11

Network Protocol missing in Windows 10/11 [FULL GUIDE]




Any network consists of at least two computers that are linked in order to share resources. This simple definition of networking applies to any OS and any OS version, thus Windows 10 makes no exception.

If protocols do not work as intended or worse if they’re missing, there is not much left to do with the network. Introducing one of the most annoying network related errors: Network Protocol missing.

Not only does this pesky error hinder the sharing process, but in some cases it can also prevent computers from accessing the internet altogether. As inconvenient as it may sound, there are ways to fix this and we have gathered the best possible solutions in the article below.

Eager to know more about Windows 10 errors and how to solve them? Find out everything there is to know in our dedicated section.

Networking is a huge part of the Windows 10 experience, and one of the most annoying network problems is the one where Network Protocols are missing. This error sounds serious, so let’s see if there’s a way to fix it.

Users report that they are unable to share files between network computers, and some are even unable to access the internet. As you can see, this problem can cause a lot of inconveniences, but there are a few solutions available.

How can I fix Network Protocol missing error in Windows 10?

Besides the Network protocol missing error, there are a few other issues that could be caused by the same culprits. For example:

Windows sockets registry entries required for network connectivity are missing

One or more network protocols are missing on this computer

Could not add the requested feature

Network protocols missing error Windows 10

One or more network protocols are missing on this computer WiFi

So, no matter the error code, you can apply the solutions from below, and (hopefully), you’ll solve the problem.

Table of contents:

Solution 1 – Temporarily disable your antivirus software

Although it’s not a good idea to disable your antivirus software, some users report that after disabling Kaspersky Internet Security their issues have been resolved.

So if you are using Kaspersky Internet Security, you might consider disabling it temporarily or switching to a different antivirus software. In addition, reinstalling antivirus software could also be helpful.

Don’t expose yourself to unnecessary risks. Find out why Windows Defender is the only malware barrier you need!

Solution 2 – Restore network protocols to default settings

Another thing we’re going to try is resetting network protocols to default settings. We’re going to do this by resetting the TCP/IP stack. In case you’re not sure how to do that, just follow the instructions:

Open Command Prompt as administrator.

When Command Prompt opens enter the following lines:

netsh int ip set dns

netsh winsock reset

Close Command Prompt and check if the issue is resolved.

If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look at this guide.

Solution 3 – Disable NetBIOS

Highlight IP v4 (TCP/IP) and choose Properties.

Next go to the WINS tab, and in NetBIOS settings section select Disable NetBIOS over TCP/IP.

Some users also claim that this issue is resolved by using obtaining IP address automatically instead of using a static IP. To change this setting just follow the first three steps from this solution.

As soon as you open IPv4(TCP/IP) Properties you should see the option that allows you select whether you want to use static IP address or to obtain one automatically.

You can’t open Control Panel? Take a look at this step-by-step guide to find a solution.

Can’t access IPv4 proprieties on Windows 10? Check out this guide and solve the problem in no time.

Solution 4 – Use Command Prompt

When Command Prompt starts, type netcfg -d and press Enter to run it.

Wait for the process to complete. After the process has been completed your computer should restart and the issue should be resolved.

In addition, some users suggest using the netsh int ipv4 install command. Just start the Command Prompt as administrator like in Step 1, type netsh int ipv4 install into Command Prompt and press Enter to run it.

After that, restart your computer and see if the issue is fixed.

Solution 5 – Use Command Prompt and sc.exe

This is a temporary solution, and you might have to revert the changes after a new Windows 10 update, if the problems start occurring. Here’s what you need to do:

Open Command Prompt as administrator.

Type the following lines, and after each line press Enter to execute it:

sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi

sc.exe config mrxsmb20 start= disabled

After entering these lines into Command Prompt, the issue should be resolved. If you start to have troubles after a Windows 10 update, you might want to restore the default settings. To do so, follow these instructions:

Open Command Prompt as administrator.

Enter these lines and after each line press Enter to run it:

sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi

sc.exe config mrxsmb20 start= auto

Solution 6 – Import Winsock keys from a different computer

Expert tip:

On the working Windows open Registry Editor and find the following keys:



Export these keys and move them to a USB flash drive.

Switch to a Windows 10 computer that has issues with Network Protocols.

Uninstall network driver.

Open Registry Editor and find the following keys:



You can export them, in case you need backup. After exporting them, delete both keys.

Restart your computer.

When your computer restarts insert the USB with Winsock keys from a different computer.

Go to Registry Editor again.

Go to the location where those keys were (HKEY_LOCAL_MACHINESystemCurrentControlSetServices)

If Winsock2 key is back, delete it again.

Import the following keys from your USB:



Close Registry Editor.

Open Command Prompt as administrator and run netsh winsock reset command.

Restart your computer.

If you can’t edit your Windows 10’s registry, read this handy guide and find the quickest solutions to the issue.

Can’t access the Registry Editor? Things aren’t as scary as they seem. Check out this guide and solve the issue quickly.

Solution 7 – Restore your router and check the cable

If none of the steps above managed to solve the problem, try resetting your router. Turn it off first, and then switch it back on after a few minutes.

Additionally, you can use a different LAN cable to connect your computer to the router.

And finally, reset your router to factory settings by pressing the small button on the back (actually, the position of the reset button depends on your router).

Solution 8 – Reinstall your Network Adapter

After completing the steps from above, you might as well want to reinstall your Network Adapters. Here’s how to do that:

Hold the Windows Key and press R.

Reinstall your network adapter using the driver accompanying the hardware.

Windows can’t automatically find a driver for your network adapter? Count on us to solve the problem.

Solution 9 – Use Network Troubleshooter

If you’re running Windows 10 Creators Update (or later), you have a new troubleshooting tool, provided by Microsoft. This troubleshooting tool is designed to deal with various issues within the Windows operating system, including various network errors.

If you don’t know how to run this troubleshooter, just follow these instructions:

Go to Settings

Choose Internet Connections

Follow further on-screen instructions, and wait for the wizard to finish the process

Restart your computer

If the problem remains unresolved, you can try with the Network Adapter option, instead of Internet Connections.

If you’re having trouble opening the Setting app, take a look at this article to solve the issue.

If the Troubleshooter stops before completing the process, fix it with the help of this complete guide.

Solution 10 – Restore network components

You can also try with resetting the following network components:

Open Command Prompt as administrator.

When Command Prompt starts, enter the following commands, and press Enter after typing each command:

IPconfig /release

IPconfig /flushdns

IPconfig /renew

If you can’t flush the DNS, take a look at this step-by-step guide to solve the problem quickly.

And finally, some users reported that updating BIOS actually solves the problem. But before you go all in and flash your BIOS, we have to warn you that it could be a risky action, as one wrong move can render your motherboard unusable.

Only do it if you know what you’re doing.

Updating BIOS seems scary? Make things way easier with the help of this handy guide.

Was this page helpful?


You're reading Network Protocol Missing In Windows 10/11

Security Vulnerability In Network Time Protocol Code Fixed

CAS Team Finds Flaw in Computers’ Timekeeping Tens of millions of computers were vulnerable to attack

Tens of millions of computers were vulnerable to sabotage of their clocks, BU researcher Sharon Goldberg has discovered. Photo by Cydney Scott

Sharon Goldberg frets about internet security so the rest of us don’t have to. In a paper released yesterday, Goldberg and her team reported the kind of security problem worth worrying about, one that could be used by a bad guy to cripple the clock function of tens of millions of computers on the internet using a single attacking machine. 

Happily, says Goldberg, a College of Arts & Sciences associate professor of computer science, fixes for the vulnerability were implemented before the paper was published.

Working with students Aanchal Malhotra (GRS’19), Isaac Cohen (CAS’16), and Erik Brakke (CAS’16) last spring, Goldberg discovered a potential vulnerability in the Network Time Protocol (NTP), the software and rules that synchronize clocks on computers. The team developed attacks that could alter the time on computer systems, compromising other applications, such as the encryption schemes that protect internet communications to bank websites. Other apps, from bitcoin systems to website authentication and login protocols, also could be breached.

“If NTP breaks, many other computing applications break as well,” says Goldberg, who holds a fellowship from the Rafik B. Hariri Institute for Computing and Computational Science & Engineering and is also a Sloan Fellow.

Before posting the paper on her project’s website, Goldberg’s team worked with the Network Time Foundation, which implements the NTP, and with software firms like Cisco Systems and Red Hat, to plug the holes in the NTP code. Goldberg says most computer users need not take corrective action, because their NTP software is routinely revised “via updates or patches to their operating systems.” She says operating systems “will be issuing patches that protect against our attacks, and other members of the Network Time Foundation are likely to do so as well.”

Experts needing to test their servers can consult the Goldberg team’s website for instructions.

“It is very likely that your laptop uses NTP to synchronize its clock to a time server somewhere out on the internet,” says Goldberg. “The encryption protocols that protect the information sent from your web browser to your bank’s website, for example, depend strongly on the accuracy of your computer clocks.”

The Network Time Foundation “really appreciates the work of Sharon, Aanchal, and their team in finding these issues and reporting them responsibly,” says NTF founder and president Harlan Stenn. “NTF has very limited resources, so the work of BU and other research teams is helpful in finding issues.”

The most serious potential attack found by Goldberg’s team involves the “kiss-o’-death packet,” a message that would prevent a computer system from communicating with its time server, possibly for years, essentially turning off NTP on the victim system.

Last week, Goldberg received a $250,000 grant from the Silicon Valley Community Foundation to continue research on the security of the NTP. She and her team applied for the grant last March, when they began to enable various computers in their lab “to speak NTP to each other,” she says, “and started running various experiments with the kiss-o’-death packet.”

“Timeshifting” attacks, in which a computer system’s time settings are altered, took longer to develop, she says, “because NTP is actually quite a complex protocol that has evolved over time.”

Goldberg says her team followed the standard “responsible disclosure” guidelines for researchers who uncover software vulnerabilities. That means alerting affected parties to the vulnerability and giving them a prescribed time to patch the problem, after which the researcher publicizes her work. Goldberg sent Cisco an early draft of her team’s paper in August—she regularly briefs that firm on her research, she says, because it has funded her work and has hired several of her students—and the company was “instrumental in helping us coordinate the responsible disclosure of our research results.”

Goldberg’s work helps cement “BU’s presence in cybersecurity,” says Azer Bestavros, a CAS computer science professor and director of the Hariri Institute. “Sharon’s work often involves undergraduate students, and they get inspired by taking her courses, underscoring how excellence in research contributes significantly to the quality of teaching and experiential learning.”

Explore Related Topics:

Show Desktop Not Working Or Missing In Taskbar In Windows 11/10

Show desktop missing or not working

There is no specific reason for this issue. It might have happened after updating Windows 11/10 or due to some other causes. But if you are facing such an issue, then you can try some helpful tips covered in this post.

Turn on the feature using the Settings app

Turn off Tablet mode

Restart File Explorer

Create a desktop shortcut

Re-register this DLL

Go back to the previous version

Reset Windows 11/10.

1] Turn on the feature using the Settings app Windows 11

Open Windows Settings by pressing the Windows and ‘I’ key combination

From the resultant drop-down, locate the option that says ‘Select the far corner of the taskbar to show the desktop’.

Toggle it ON.

Windows 10

It might be possible that Peek to preview the desktop option is turned off because of which you’re facing this issue. In that case, you can simply access taskbar settings in Windows 10 Settings app and turn on that option. The steps are as follows:

Open Settings app using Winkey+I hotkey or Search box

Select Personalization category

Select Taskbar page

Turn on Use Peek to Preview the desktop…. option available in the right section.

Now place the mouse cursor on the Show desktop button. It should help you peek at the desktop.

2] Turn off Tablet mode

Windows 10 not showing desktop error may also occur if Tablet mode is turned on. So, you need to turn it off using the following steps:

If you are stuck in Tablet mode and not able to turn it off using this method, then you can check other ways to turn off Tablet mode in Windows 10.

Bonus Tip: You can also use Winkey+D hotkey to show the desktop.

3] Restart File Explorer

You might have noticed that sometimes the Start menu, Taskbar, or other applications become unresponsive, and restarting File Explorer (or Windows Explorer) helps in fixing that problem. The same might also work to make the Show desktop button work again. So, try to restart File Explorer and see if the problem is fixed.

4]  Create a desktop shortcut

Create a new shortcut using this for Path and pin it to the taskbar:

explorer.exe shell:::{3080F90D-D7AD-11D9-BD98-0000947B0257} 5] Re-register this DLL

If Aero Peek is not working, open Taskbar settings and ensure that the Use Peek to preview the desktop etc… setting is set to the On position.

Re-register the concerned DLL file by using the following command and see if that works for you:

regsvr32 /i shell32.dll

Restart PC and check.

6] Go back to the previous version of Windows 11/10

Like we mentioned earlier, this Show desktop, not working issue might also occur after updating Windows 11/10. In this case, you can go back to the previous version of Windows.

However, this option is available only if the chúng tôi folder (that contains a copy of the previous version or build of Windows) is present in your PC and your PC was updated less than 10 days ago.

7] Reset Windows 11/10

Another option to resolve show desktop error is reset Windows 11/10. Before you reset your PC, you also have the option to remove all apps and settings and keep your files or remove everything, including your personal files.

How do I get the Show desktop button back on the Taskbar in Windows 11? How do I fix my desktop icons not showing in Windows 11?

If you cannot find icons on the desktop, you need to check the Desktop Icon Settings panel first. Following that, you can open the Task Manager and restart the Windows Explorer process. Also, it could help if you could rebuild the icon cache on your Windows 11 PC.

That’s all!

Some users are benefitted using the options mentioned above. I hope something will help you as well.

Taskbar Icons Not Showing, Missing, Invisible, Blank In Windows 11/10

Some users have experienced abnormal behavior where their Windows 11/10 Taskbar icons are not showing, become invisible, go missing, become empty or blank or disappear & reappear randomly. If you have faced this issue, here are a few things we suggest you could try to resolve the issue.

Windows Taskbar icons not showing, missing, invisible or blank

If your Windows 11/10 Taskbar icons are not showing, go missing or disappear & reappear randomly, become empty or blank, then one of these suggestions is sure to help you:

Restart File Explorer

Restart your Windows PC

Check Taskbar behaviors

Clear Icon cache

Remove and repin Taskbar icons

Disable Tablet Mode

Delete Iris Service

Troubleshoot in Clean Boot State

Update Display Driver

Use File Association Fixer to fix PNG/JPG associations

Uninstall the last Windows Update

Repair System Image & Run SFC using FixWin.

Go through the list and see which one or more of them could apply in your case.

Windows 11/10 Taskbar is empty or blank 1] Restart File Explorer

Restart the chúng tôi process and see if that helps you. You will have to open the Task Manager for that purpose.

2] Restart your Windows PC

If restarting Windows Explorer does not work, simply try restarting your Windows 11/10 PC. This hopefully should get all the taskbar icons back on the taskbar.

3] Check Taskbar behaviors

Make sure that the Automatically hide the taskbar option is unchecked under the Taskbar behaviors.

4] Clear Icon cache

5] Remove and repin Taskbar icons

Unpin all the Taskbar icons and then freshly rein them and see if it helps.

6] Disable Tablet Mode

If you are using the Tablet Mode, then you might want to disable this Tablet Mode. In this mode, open apps do not rest on the taskbar.

7] Delete Iris Service

The IRIS Service belongs to IRIS Customer Service. You may uninstall the program that uses this service and see. Or else if you see this Service on your computer, then deleting the Iris Service on your Windows 11/10 PC can also help you to fix the missing Taskbar icons and other Taskbar-related issues. So, let us see how to go about it.

Create a system restore point first and then press Win Key + ‘R’ Key to open the Run dialogue.

Type regedit in the text field and press Enter. The Registry Editor will open. Go to the following location:


Restart your Windows PC and wait for your missing taskbar icons to appear on the taskbar.

8] Troubleshoot in Clean Boot State

Perform a Clean Boot and try to troubleshoot the issue manually. Clean-boot troubleshooting is designed to isolate a performance problem. To perform clean-boot troubleshooting, you must take a number of actions, and then restart the computer after each action. You may need to manually disable one item after another to try and pinpoint the one that is causing the problem. Once you have identified the offender, you can consider removing or disabling it.

9] Update Display Driver

Now, this may or may not help you – but it is worth a try. Update your Graphics Driver and see. You could download the latest driver from the manufacturer’s site and install it.

10] Use File Association Fixer to fix PNG/JPG associations

Again, this may or may not help you, but create a system restore point first and use our freeware File Association Fixer to repair and restore potentially broken file associations. Use it for PNG and JPG files only.

11] Uninstall the last Windows 11/10 Update

If you recently updated your system and the issue started then we suggest you uninstall the recently installed updates on your device.

This will uninstall the last Windows update on your PC.

12] Repair System Image & Run SFC using FixWin

All the best!

Read next: System icons not showing or missing from Windows Taskbar.

Windows Taskbar icons missing after sleep; How to fix?

If Taskbar icons are missing on your Windows 11/10 PC after sleep, restart Windows Explorer first. It’s one of the easiest solutions that can fix any issues related to the Taskbar, Start Menu, or Action Center. If not, restart your Windows PC.

How to fix Windows Taskbar icons not displaying correctly?

The Windows 11/10 taskbar could stop working due to a glitch in the Windows Explorer Service. Restarting Windows Explorer usually fixes it. If there is an issue with the taskbar due to a faulty Windows update, then you may fix the issue by uninstalling all recent updates installed before your taskbar stopped working.

Power Options (Sleep, Shut Down, Restart) Missing From Start Menu In Windows 11/10

There are currently no power options available

In my case, the WinX Menu offered only the Sign out option.

Why does my Windows show No Power Options available?

The cause for missing Power Options in Windows Start Menu could be corrupted system files or a change in Power settings – maybe after a Windows Update. But worry not, you can fix it!

How do I restore Power Options?

To restore missing Power Options from Windows Start Menu, run System File Checker and see. If that does not help, tweak the Registry or use change this Group Policy setting – Remove and prevent access to the Shut Down, Restart, Sleep, and Hibernate commands. This post explains it all.

Power Options missing in Windows 11/10

If you see There are currently no power options available message in Windows 11/10, here are some options to help you resolve the issue:

Use Group Policy Editor

Use Registry Editor

Use Ultimate Windows Tweaker

Fix Corrupt OS Files

Run Power Troubleshooter

Restore default Power Plans.

Run System Restore.

1] Use Group Policy Editor

This policy setting prevents users from performing the following commands from the Start menu or Windows Security screen: Shut Down, Restart, Sleep, and Hibernate. This policy setting does not prevent users from running Windows-based programs that perform these functions. If you enable this policy setting, the Power button, and the Shut Down, Restart, Sleep, and Hibernate commands are removed from the Start menu. The Power button is also removed from the Windows Security screen, which appears when you press CTRL+ALT+DELETE. If you disable or do not configure this policy setting, the Power button, and the Shut Down, Restart, Sleep, and Hibernate commands are available on the Start menu. The Power button on the Windows Security screen is also available.

Open chúng tôi and navigate to the following setting:

Then in the Shutdown the system rule, grant your domain users that permission.

2] Use Registry Editor

The Group Policy Editor is available in Windows 11/10 Pro, Windows 10 Enterprise, and Windows 10 Education editions only and not in Windows 10 Home. If your Windows 10 does not ship with GPEDIT, Run regedit to open the Registry Editor and navigate to the following registry key:


Now on the right side, check if a value named NoClose exists, and if it does, its value should be 0.

Restart your computer and see. The Power Options should appear.

If this does not help, there is another thing you can try.

Open Registry Editor and navigate to the following key:


Change the value of CsEnabled from 1 to 0.

Restart your computer and check.

Read: Your power plan information isn’t available in Windows 11

3] Use Ultimate Windows Tweaker

Incidentally, you can also use our freeware Ultimate Windows Tweaker to make Windows show Power Options.

To show the Hibernate option, you will have to ensure that Hibernate is enabled by running the following command in an elevated Command Prompt window:

Powercfg /hibernate on 4] Run SFC & DISM Scans

System File Checker and DISM tools can fix any corrupt system file on Windows and replace them with a new one. If this is the reason why Power Options are not showing up, then use these tools to resolve the problem. Run the following commands on an elevated command prompt:

sfc /scannow

DISM /Online /Cleanup-Image /RestoreHealth

Follow our guide on which of these tools you can use first.

5] Run Power Troubleshooter

Run Power Troubleshooter and see if that helps.

6] Restore default Power Plans

Restore default Power Plans and see if that helps.

7] System Restore

If nothing works, and you had the option earlier, you can choose to restore the PC to an earlier point. You can search for the tool in the Start menu and then follow the wizard to select what may work best for you. That said, it is equally important that you keep creating one restore point every day and have at least 2-3 previous backups. Follow our detailed guide on how you can use the restore point.

What is causing the ‘No Power Options available’ error in Windows Power Options?

Apart from the Windows update, which had a bug, there are other reasons for this to happen. The reasons include corrupt system files, the current user not having enough permission, corrupt registry entries. If one of these happens, then OS will not be able to read the required file to bring up the menu, or if it finds the permission is not adequate, it doesn’t display them.

How do I restart my computer without power options?

There are multiple ways to restart a PC, and they are much faster than the traditional menus. When on Desktop and no window is open, use ALT + F4 to bring up the shutdown menu box. Here you can select Shutdown and press the Ok button to shutdown the PC.

How do you get hidden power plans?

You can use powercfg -restoredefaultschemesin an elevated Windows Terminal to restore or enable the hidden power plans. PowerCFG is a command-line tool that allows you to configure Power Settings on a PC or Laptop and get a battery health report. This post will show you how to restore missing Default Power Plans in Windows.

I hope this helps!

How To Detect Home Network In Windows 10

How to Detect Home Network in Windows 10






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

How do I detect my home internet network on Windows 10, 8.1 laptops or PC?

Some of us when we buy a new laptop for example with Windows 10 or Windows 8.1 on it and we try to connect to the wireless internet router in our home it fails to detect our home network, but we need to be aware of a few things before we try to connect to the network like making sure the wifi adapter on the laptop or PC is turned on properly. In most of the cases, there is a Wifi icon light somewhere near the keyboard of the laptop and we need to see if it is turned on, if not we need to turn the adapter on in order to detect our wireless home network.

How to find a home network in Windows 10? 1. Reboot your PC

Reboot the Windows 8 PC or laptop.

Try to connect after the reboot.

If it doesn’t work go to the second option.

2. Power-off your router

Unplug the router you have in your home from the power outlet.

Wait between 20 and 30 seconds with the power off on the router.

Plug in the router again to the power outlet.

Wait approximately 30 seconds for the router to initialize.

Now you will need to try to connect again to the network with your PC or laptop and see if it did the job

3. Check your Wi-Fi connection distance

We might have a problem when connecting to our home group network because our PC or laptop is situated to far from the router. In this case, you won’t be able to catch a signal from the router or it will connect and disconnect regularly making the network connection very annoying.

The only way we can fix this issue is either move the Windows 8, 8.1 PC or laptop closer to the router or you can buy an amplifier for the wifi connection in order to increase the range of your router.

4. Check if router works normally

Your router or access point might not be working properly.

Note: To check if your router is working, try connecting to the router via other devices like phones and tablets.

5. Check for interfering signals

The devices can be for example microwave ovens or just a phone that has the same frequency as your router, in this case, you can check by moving the devices in another room or far from the router.

Expert tip:

6. Disconnect unneeded devices from the router

The router can have too many connections to it, so if you have a lot of PCs and other devices connected to it you might have issues detecting or connecting to the router.

In this case, you can try to disconnect some of the devices and see if you can detect the home network and connect to it .

7. Check the router for monitor mode

The last thing we can try is to check if the router in your house is in monitor mode. There are some programs for your Windows 10, 8.1 PC or laptop that will monitor the network if you leave it opened in the background. The only problem is that if you leave the monitoring program opened the router will not let you detect the network and therefore you will not be able to connect to it.

Solution: Close any network monitoring programs you might have running on your PC or laptop, unplug the router’s power cable, reboot the PC, plug the power cable in the router and try to see if it will detect the home network now.

8. Other Interner connection errors that you might encounter

Connection-related issues are some of the most annoying and often-appearing on Windows laptops and PCs. We have created countless guides in order to fix such issues and helped thousands of our readers with that. Here are some that will help you to solve the most encountered internet connection issues:

Can you detect your home network in Windows 10 and Windows 8.1 now?If you followed the options presented above and you still cannot detect the home network please write us below and we will see what we can do to fix this issue.

Was this page helpful?


Update the detailed information about Network Protocol Missing In Windows 10/11 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!