Trending February 2024 # How To Use Dual Sim With Apple Watch Gps + Cellular Models # Suggested March 2024 # Top 5 Popular

You are reading the article How To Use Dual Sim With Apple Watch Gps + Cellular Models updated in February 2024 on the website Tai-facebook.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Use Dual Sim With Apple Watch Gps + Cellular Models

Things you need to know:

You’ll need an Apple Watch Series 4 or newer models with GPS + LTE support.

Your carrier should support cellular service support.

You can only use one cellular plan at a time.

You should connect your Apple Watch to iPhone XS or newer models running iOS 12.2 and above.

You must set up the second cellular plan on your iPhone.

Do you want to seamlessly use two phone numbers on your Apple Watch to make calls and send messages? But if you’re wondering how you use Dual SIM to your Apple Watch. Luckily, you can add multiple cellular plans to your Apple Watch.

How to set up multiple cellular plans on Apple Watch

You’ll need to set up a cellular plan on your Apple Watch before setting up the second one. And once you’ve done setting up your Apple Watch, follow along to add a secondary cellular plan to your Apple Watch.

Open Apple Watch app on your iPhone.

Select the My Watch tab.

Tap Cellular → Set Up Cellular or Add a New Plan option.

Follow the onscreen instructions to set up the secondary cellular plan.

The onscreen instructions might vary from one carrier to another. Both your plans will get a separate bill. Furthermore, you can add up to five cellular plans to your Apple Watch. Although, you’ll be able to connect to one cellular plan at a time.

Also, this feature isn’t available for pre-paid and some older accounts. However, you can contact your carrier provider to check if Apple Watch supports your cellular plan or if you have an enterprise or corporate cellular plan.

How to switch between plans

Once you’ve set up multiple cellular plans on your Apple Watch, you can switch between these carriers using your iPhone or Apple Watch. Here’s how you can switch between cellular plans.

On iPhone

Open the Apple Watch app and tap My Watch → Cellular. Tap on your preferred plan, and your Apple Watch will switch to that carrier.

On Apple Watch

Open Settings → Cellular and tap on your preferred plan on your Apple Watch to switch to your preferred carrier plan.

Receive calls and messages on Apple Watch with multiple carrier plans

Taking calls and messages on Apple Watch will differ depending on whether your iPhone and Apple Watch GPS + Cellular are in range.

Apple Watch and iPhone connected

When your Apple Watch and iPhone are connected, you can receive calls and messages from both plans directly on your Apple Watch. You’ll also see a badge indicating the cellular plan in use.

A “P” icon indicates the primary SIM; an “S” icon indicates the secondary SIM. Furthermore, your Apple Watch will respond using the same plan in this scenario.

Apple Watch Connected with an iPhone

Apple Watch and iPhone not connected

If your iPhone is switched on but not in the range of your Apple Watch, you’ll receive calls and messages on your Apple Watch from both carriers. While responding, it’ll also use the same plan from which the call or message came.

If your iPhone is off, you’ll receive calls and messages on your Apple Watch but only from your current active plan. Although, you can change your current active plan from your Apple Watch by going into Settings → Cellular and selecting a different cellular plan.

How to remove secondary cellular plan on Apple Watch

Removing any cellular plan from your Apple Watch is as easy as adding it. Follow along to know how to remove it.

Open Apple Watch app on your iPhone.

Select My Watch tab → Cellular.

Tap the “i” button next to the cellular plan you want to remove.

Select Remove [carrier] Plan.

Tap Remove [carrier] Plan for confirmation.

You can remove all cellular plans from your Apple Watch when you erase and unpair it and select the “Erase All” option.

FAQs

Do I need a second SIM for Apple Watch?

If you regularly use Dual SIM on your iPhone, you can add both to your Apple Watch. If not, you can leave your Apple Watch with a single SIM. Given that your Apple Watch will be close to your iPhone most of the time, you wouldn’t be relying on your SIM for cellular data.

Can you connect two phone numbers to an Apple Watch?

You can set up and use up to five cellular plans on your Apple Watch. However, you’ll need to set them up on your iPhone to add them to your Apple Watch.

So this is how you can set up and remove multiple carrier plans on your Apple Watch GPS + Cellular models. You might have a lot of queries about the same thing, and I’ve answered a few of your most common questions.

You might also like to read:

Author Profile

Sajid

Sajid is an Electronics and Communications Engineering graduate who loves writing about tech. He’s primarily interested in writing about Android, iOS, Mac, and Windows. You’ll find him watching Anime or Marvel when he’s not writing.

You're reading How To Use Dual Sim With Apple Watch Gps + Cellular Models

The Best Apple Watch Screen Protectors (All Models)

It’s essential to use an Apple Watch screen protector if you want to keep your watch’s display looking as good as new for a long time to come. The right protection will guard against scratches, scuffs, and cracks so that you can go about any activity without worrying about damaging your watch.

Below, I’ve picked out some of the best Apple Watch screen protectors that are high-quality yet affordable. One thing to keep in mind is getting the right size screen protector for your watch. Secondly, you should pay attention to the material of the screen protector and what kind of damage it guards against.  Check out the list below for some great options.

Best Apple Watch screen protectors

Best overall: Spigen Ultra Hybrid

Spigen is a well-known name for high-quality yet affordable iPhone cases and accessories. This ultra hybrid screen protector for the Apple Watch checks all the boxes with its shock-absorbent bumper, raised bezels, and clear screen cover. It fits snugly around the entire display and keeps off everyday wear and tear. Precise cutouts ensure easy access to the buttons. In addition to the classic transparent protector, you can also get it in a space crystal color option.

Price: $13.99

Buy for Apple Watch Series 4/5/6/SE

Buy for Apple Watch Series 7

Best Apple Watch Screen Protector + Case: Misxi

This glass screen protector from Misxi is equally effective as the Spigen Ultra Hybrid but much cheaper. I love the snap-on design that makes it double up as a case for your Apple Watch. The only downside is that it won’t offer protection underwater because liquid can get trapped under it. But this is not too big a concern because it’s super easy to snap on and off whenever needed. It comes in a handy 2-pack and you can choose from a range of color options to change up your style as you like.

Price: $10.99 for 2-pack

Buy for Apple Watch Series 4/5/6/SE

Buy for Apple Watch Series 7

Best value: LK

If you’re looking for more conventional protection for your Apple Watch, you can’t go wrong with this flexible TPU screen protector that fits perfectly along the curved edges of your watch. The 0.1mm thickness keeps things light and maintains your watch’s original touch sensitivity. The best part is that it’s super affordable and comes in a handy pack of 6 screen protectors.

Price: $9.99 for 6-pack

Buy for Apple Watch 44/45 mm

Buy for Apple Watch 40/41 mm

Best aesthetics: ZAGG Invisbleshield

Just like with any other product, Apple Watch screen protectors have their flaws. One of these is their tendency to let dust accumulate around the watch’s rounded edges. If that’s bothering you, this Zagg screen protector has an aesthetic design with edges that beautifully match your watch. So, even if dust collects around the corners, it won’t be visible.

At the same time, the hybrid glass material is less prone to chipping and absorbs mild impacts to keep the display safe. It’s a great choice if you want to keep your watch looking great while still protecting it.

Price: $7.99

Buy for Apple Watch Series 4/5/6/SE (44mm)

Buy for Apple Watch Series 4/5/6/SE (40mm)

Best for just the screen – Spigen ProFlex

Here’s another option from Spigen that offers full-screen coverage and robust protection from scratches and scuffs. It’s got an oleophobic coating that keeps away those dreaded fingerprint smudges too. Moreover, it comes with an auto-alignment installation kit for effortless application. Pair it with a Spigen Apple Watch case for the ultimate protection. Unfortunately, this one’s not available for the Apple Watch Series 7.

Price: $12.99 for 2-pack

Buy for Apple Watch 44 mm

Buy for Apple Watch 40 mm

Best film protector – Liwin

If you’re looking for a non-glass screen protector for your Apple Watch, go for this acrylic film that offers supreme clarity and adequate protection from minor scratches. In fact, it claims to “self-repair” small bubbles or scuffs within 24 hours due to its flexible material. It fits perfectly from edge to edge and maintains original touch sensitivity for seamless use.

If you’re looking for a non-glass screen protector for your Apple Watch, go for this acrylic film that offers supreme clarity and adequate protection from minor scratches. In fact, it claims to “self-repair” small bubbles or scuffs within 24 hours due to its flexible material. It fits perfectly from edge to edge and maintains original touch sensitivity for seamless use.

Price: $9.99 for 6-pack

Buy for all models

Best liquid screen protector – Luvvitt

A liquid screen protector is a pretty versatile and easy-to-use option because you can “paint” it onto your Apple Watch display and other screens too. It’s made of silica dioxide (Si02) which consists of microscopic particles of glass suspended in a liquid solution. This fills in the imperfections of the screen and adds an ultra-thin layer of protection. The best thing is its ease of use and the option to apply it on multiple devices.

Price: $18.99 

Buy now

Don’t miss these other essential accessories: 

How To Use Emergency Sos On Apple Watch

When in trouble, medical or otherwise you can send an emergency SOS on Apple Watch. The inbuilt feature has saved multiple lives. Various options in Apple Watch SOS Mode can be enabled or disabled as per your convenience and requirement. So, Let’s check out how you can use the SOS feature.

How to Use Emergency SOS on Apple Watch

What is SOS on Apple Watch?

SOS is an international code signal of extreme distress, and both iPhone and Apple Watch have inbuilt SOS features. As and when it is triggered, the emergency service department of your area is notified. Moreover, a message will be sent to your emergency contact along with your location.

The SOS features on Apple Watch includes – call for help, heart rate alerts, smart medical ID, and fall detection (for series 4 only).

How to Use Emergency SOS on Apple Watch

Your watch will employ location triangulation to gather your current location to find the emergency services contact number. Though in some regions, you might have to manually enter the number. Once the call is made, the watch sends alerts to your emergency contacts, along with your current location.

Even if your GPS is off, the watch will auto-enable it. If your location is changed, an updated location will be sent to your contact until the SOS mode is deactivated. The Apple watch needs eSim or a Wi-Fi connection to make the call; whether via an already connected network or your paired iPhone. So, make sure that Wi-Fi calling is enabled on your Apple Watch.

You can call for help with Apple Watch using SOS feature in two ways – multi-press SOS and single press SOS.

Step #1. Long press the Side Button of your Apple Watch until you see the Power-off Slider.

Step #2. Tap on Emergency SOS Slider and swipe right.

The watch will immediately call emergency services and message your emergency contacts. Under some circumstances, looking at your watch to slide right might not be a possibility. You can use the single-press feature for the same, though this will only work if the feature is activated via your iPhone.

How to Enable Emergency SOS on Your Apple Watch

Step #1. Open Watch App on your iPhone.

Step #2. Scroll down and select the Emergency SOS option.

Step #3. Switch the toggle option next to Hold Side Button to ON.

If you want to disable this feature, just turn the toggle off. Now that you have enabled the Single-press SOS calling, here’s how to use the feature:

Activate Single Press SOS on Apple Watch

Step #1. Press and hold the Side Button of your Apple Watch. Continue holding until the countdown finishes.

Once the countdown finishes, your watch will automatically make an SOS call. Next, your emergency contacts will be notified. While the watch counts down from three, it sends out alarm tones, even if it’s in the silent mode. In emergency situations, where you might not want to make a noise, use the multi-press SOS.

The three tones act as a notification that the emergency call mode is activated. This comes in handy if the feature is mistakenly activated. Which brings us to the question of how to cancel the Emergency SOS call.

How to End SOS Call From Apple Watch

You also have an option to end the call, if it was mistakenly made. During the countdown period, release the side button to cancel. If the connection is being made, tap on the End Call icon. You will be asked to confirm the action, tap on Yes.

However, if you have added emergency contacts, a new countdown will begin. This will count down from 10 to send your emergency contacts an SOS message and location. Tap on Cancel to stop the message. You will be asked to confirm the action, tap on Yes. Once canceled, your watch will display a Medical ID, that will have your details.

This contains general information provided by you in the health app such as blood group, height, weight, or medical conditions. When you scroll down, your emergency contacts will also be shown, along with their numbers and relationship with you.

The emergency contacts on your Apple Watch and iPhone is stored along with your Medical ID in the Health App on your phone.

Step #1. Open the Health app from your iPhone and go to Medical ID from the bottom-right corner.

Step #2. Tap on Edit on the top-right corner.

Step #3. Scroll down to the Emergency Contacts section and tap on + add emergency contact.

Step #4. Search for the contact of the person you want to add.

Step #5. Choose Relationship.

Your emergency contact has been added, repeat the process to add more.

If you want to delete the contact, tap on ‘- (remove icon)’. A Delete option will slide in the window, tap on it to confirm.

If you are using iOS 13, that there is just a small change in the location of the Medical ID tab. You can open the tab via – Health app → Profile Icon → Medical Details → Medical ID.

What is A Emergency Medical ID

You can call the Medical ID a contingency plan, it has vital health and personal information such as your allergies and medical conditions. In an emergency, Medical personnel can view this information without unlocking your Apple Watch. All they have to do is press the side button on your watch and drag the Medical ID slider to the right to view. Noting the information, they can inform your emergency contact and offer suitable aid.

However, to enable this feature, there are two things you need to take care of first. Set an Emergency Medical ID on your iPhone and allow the Medical information to be seen when the screen is locked. For the latter, open the Health app → Medical ID, then turn On the toggle in front of Show When Locked.

Precaution is always better than cure!!

When we think about the future, we often estrange ourselves from the possibility of something terrible. However, life as we said earlier, is quite unpredictable. Under the emergency, you might not get time to update, enable, and set the SOS mode for your Apple Watch.

Also, don’t forget to enable SOS services for your iPhone as well. Being prepared will always serve you well. Also, it aids you in keeping calm, knowing that help is on its way.

Related Posts:

Author Profile

Dhvanesh

The founder of iGeeksBlog, Dhvanesh, is an Apple aficionado, who cannot stand even a slight innuendo about Apple products. He dons the cap of editor-in-chief to make sure that articles match the quality standard before they are published.

How To Dual Boot Asus Transformer With Ubuntu

I got myself a Asus Transformer tablet in June 2011 and since then, I have been looking for an easy way to install Ubuntu on it. The form factor, the keyboard dock and the hardware spec of Asus transformer make it just right for a portable computer. However, back then, getting Ubuntu on board the device is not easy and requires lot of hacking and scripting.

Recently, I re-checked the XDA-Developers forum again and found that someone has created a super-easy way to create a dualboot system. I tried it and it works! Here’s what I did:.

Disclaimer: This tutorial will format your tablet hard disk and wipe out all your data. It could also brick your tablet. It would definitely void your warranty. MakeTechEasier will not be held responsible for any damage, data loss, fire or death of a loved one resulting from using this mod for your device.

2. This tutorial only works for Asus Transformer with SBKv1. If your device is running SBKv2. This tutorial is not for you. Here’s how to check if your device is running SBKv1 or SBKv2.

Download sbkcheck.tar

Extract the tar file. Open a terminal and cd to the sbkcheck folder

Put your Asus Transformer to APX mode. To do that, first power off the device. Power on the device again. When you see the Asus EeePad splash screen, press the “Power + Vol up” buttons. When the screen goes black, and remain black, you are in APX mode. Once it is in APX mode, connect the device, via USB to your computer

Back in the terminal, run the command:

sudo

.

/

sbkcheck

It should return a message whether your device is running SBKv1 or SBKv2. As a general guide, if you bought your Asus Transformer after Aug 2011, most probably it is running SBKv2.

3. The Asus Transformer mentioned in this article is the 1st gen Asus Transformer, not the quad-core Transformer Prime.

Backing up your data

There are a few ways to backup your data. You can either:

1. download a file manager app from market. Use the file manager to transfer important files to the external SD card.

2. Sync your emails, contacts, calendar, files with Google and Dropbox. Even if your device is wiped, your data is still intact in the cloud.

Now that you have verify the SBK version and backed up your data, here the exact steps to create a dual-boot system:

1. Download OLiFE Prime.

2. Extract the file (DO NOT extract the files on a windows type filesystem such as NTFS or FAT or you will run into problems. Do it all inside your linux partition).

3. Open a terminal and cd to the OLiFE directory. Run

sh

chúng tôi will see an agreement page. Read it carefully. Once done, type “understood” and press Enter.

4. In the next screen, press ‘2’ to select the flash device option

5. Now, it will show you the different option to flash the device. Regardless what your intention is, choose ‘1’ to dualboot.

6. Choose ‘1’ to select the Android as the default OS. Ubuntu as the default doesn’t work.

7. Put your device in APX mode and connect it to the computer via USB. The script will now format your device, partition the hard drive and copy the ubuntu and Android img over. This will take a long time, so go grab yourself a coffee and relax.

8. Once it is done, your device will restart and boot into your Android OS.

Installing Ubuntu

Now that the chúng tôi is copied over to your device, it is time to install it.

1. Power off your device. Press “Power + Volume Down” button until the splash screen comes alive. At the top, you should see a message asking you to press the “Volume Up” button. Release the “Power + Volume Down” button and press “Volume Up” button. This will boot into the Ubuntu installer (this is also the way to boot into Ubuntu in the future).

2. Once you reach the Ubuntu main screen, proceed on to install Ubuntu (make sure your device is connected to the keyboard dock).

If you don’t have the keyboard dock, connect it to the computer via USB again. On your Linux computer, in the terminal, run the command:

sh

chúng tôi time, press ‘5’ to select the “Onscreen keyboard”. You should now see the onscreen keyboard appear on your Ubuntu screen.

3. Proceed with the Ubuntu installation. If everything goes well, you should have a dual OS tablet now.

Post install configuration

Everything works out of the box for Ubuntu on Asus Transformer, however, the Unity desktop is taking up a lot of resources, causing the system to run very slowly. What I did is to open the Ubuntu Software Center and install LXDE – a lightweight desktop manager. Once I switched to LXDE, everything runs smoothly and quickly.

Inject bluetooth firmware

The bluetooth firmware is not included in the Ubuntu installer due to licensing issue. Here’s how you can get bluetooth working on Ubuntu.

Connect the device to your computer again and run the OLiFE script. This time, press ‘4’ to select “Inject Firmware”.

Press ‘1’ to select the Default Install.

When prompted which firmware to inject, select either one will do.

That’s it. Enjoy!

Damien

Damien Oh started writing tech articles since 2007 and has over 10 years of experience in the tech industry. He is proficient in Windows, Linux, Mac, Android and iOS, and worked as a part time WordPress Developer. He is currently the owner and Editor-in-Chief of Make Tech Easier.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Spoof Pokemon Go Gps Location With Anygo

Games, applications, and even movies and TV shows all have location-based restrictions. On an Android phone, you can simply change your location with various third-party apps, but this isn’t possible on an iPhone or an iPad.

But what if we told you that you can spoof iPhone location without jailbreaking your device? You may easily accomplish this with the help of the iToolab AnyGo app.

It’s one of the most popular Geo spoofing apps for iOS. iToolab AnyGo has been updated to support iOS 16 by iToolab. If you have already upgraded your iPhone to the most recent version or you’re going to purchase an iPhone 14 model.

iToolab AnyGo: The best Pokémon Go Spoofer for iPhone

The app fully supports the latest iOS 16 and iPhone 14 and works well with location-based AR games and social apps such as Pokémon GO,Tinder, Bumble, life360, etc. People can easily spoof their location without walking or going out.

AnyGo’s GPS simulation is one of its other standout features. Users are free to choose a fictitious route on the map and simulate their movement along it. To avoid being captured, you can even change the movement pace.

Also, using the app you can import GPX route file to simulate a fake GPS route. You can custom walk speed looks natural, You can use a joystick to have a better GPS control. In addition, it supports multi-device management, thus you can change multiple iPhone devices locations simultaneously.

How Does iToolab AnyGo Work?

We’ll provide you with a few real-world examples of how AnyGo operates so you can see how it functions.

Teleport to any location in the world Simulate movement along a specified route

You can also use AnyGo to simulate GPS movement between two pre-determined locations:

Multiple mode

If you would like to pass through many places on the map, choose the multi-stop route.

Step 1: Select the multi-stop route in the upper right corner of the screen. Then select all the locations you want to pass through.

Note: Make sure that the locations you set are along a specific route to avoid the movement appearing unnatural.

The GPS on your device will now be moving along the specified path, passing through all the selected points at the specified speed. If you want an authentic experience, you can choose the “Realistic Mode” for a natural speed.

Gizchina News of the week

Join GizChina on Telegram

Import GPX routes file to auto walk

By importing GPX, we may quickly and easily use featured routes and share GPX location data with others.

Step 2. Choose the GPX file you want to use and import it to AnyGo.

Special Features of iToolab AnyGo 1. Favorite location and route

All favorite locations and routes will be saved in favorites. You can press the Star icon on the right side of the main interface to show the Favorites box.

2. Historical records 3. Automatic closing the path 4. Returns or Loops 5. Wi-Fi wireless connection

iToolab AnyGo supports wireless connection now. Users can connect the device to the computer through Wi-Fi. You can ditch the USB data cable and connect multiple phones easily.

How to connect:

Turn on the Wi-Fi on your iPhone and connect to your wireless network.

Connect the computer to the same Wi-Fi network.

Choose the device you want to connect.

Useful tips to avoid bans while using GPS spoofer

Here are some tips on how to avoid Pokémon Go ban when using AnyGo:

Please change the location with Anygo first, make sure your location has been modified successfully, and then open the Pokémon game to avoid the game detecting that the location has changed in a short time.

Do not jump long distances while playing Pokémon

AnyGo provides Coldown Time reminder to help you avoid the risk of being banned.

Anygo can customize the walking speed, from 3.6km/h to 100km/h, you can set a real and natural speed. And AnyGo can simulate real walking, choose Realistic Mode option, so that your walking speed is not a fixed constant speed but a natural variable speed.

iToolab AnyGo Pricing

You should try out AnyGo from iToolab now that you are aware of its features. It is accessible on computers running Windows and macOS and offers a variety of subscription options.

The 1-month monthly subscription, for instance, costs $9.95. The lifetime package costs $59.95, while the three-month quarterly plan is $19.95, which is perfect if you frequently change your location.

AnyGo offers a 30-day money-back guarantee, in case you were curious. Additionally, you receive free customer service and updates for life.

Best of all, during holiday sales, you can enjoy up to 70% off using this link.

Verdict

As we indicated before, AnyGo from iToolab includes a number of features. Additionally, jailbreaking your iPhone or iPad, which loses you your warranty, is not even necessary. Therefore, using it is completely easy and safe.

Using this solution, you can access content that is geographically banned from your location. We highly recommend you try AnyGo and test its wonderful features. Additionally, if you are a Pokémon Go player, it’s the best location spoofer for you.

How To Change Your Apple Watch Face

Last Updated on May 15, 2023

Apple watches are great devices. You can access heart rate information, notifications, and even estimated blood oxygen levels all from your wrist! 

There are a variety of versions to choose from. The most recent Apple Watch is the series 7 model, which claims to have a larger display, better charging time, and more durability. 

One of the best things about the watches is that they are pretty customizable, so you can choose your own Apple watch face and change them whenever you want – from both your iPhone and the watch itself.

This article will show you all the different ways you can change the watch face on your Apple Watch. 

How To Change The Watch Face On Your Apple Watch

Switching to different watch faces from your Apple Watch is very simple.

Step

1

Swipe Left Or Right

All you need to do is swipe left or right from each side, and you will see the different watch face options that you have previously added to the watch. 

Step

2

Swipe To Center

Once you have found the one you want to switch to, you don’t have to do anything else. Just swipe it to the center and that’ll be your new watch face!

How To Customize The Watch Face On Your Apple Watch

Another great thing about these little devices is that you can actually customize the watch face on the watch itself!

Step

1

Edit

Once you have selected the face you would like, tap on it and select ‘Edit’. You will then be able to select an array of feature options. You can change the color or markings of certain faces.

Step

2

Press Down

You can do this by tapping to select a change, and then using the digital crown to change it. Once you are happy with the changes, press down on the digital crown and the changes will be saved. 

How To Delete A Watch Face From Your Apple Watch

While knowing how to add and change watch faces from your Apple Watch is essential, knowing how to delete them is equally important.

Step

1

Swipe Left And Right

As you would do to select a watch face, swipe left and right until you reach the face you would like to delete.

Simply swipe up, and you will see an option that says ‘Remove’. Tap this, and that selected watch face should be removed. 

How To Add A Watch Face From Your iPhone

If making all these changes on the small face of your Apple Watch is a little too fiddly for your liking, then you can do them all directly from your iPhone!

Step

1

Face Gallery

Simply go to the Watch app on your phone, and go to the ‘Face Gallery’ that is located at the bottom. Here, you can search through the different watch faces that are available.

Once you have found the one you’d like to include in your collection, you can press ‘Add’.

Step

2

Customize

You can also customize different watch faces from your iPhone. Once you have selected a watch face, you can choose from a variety of different colors, styles, and complications.

Step

3

Add

Once you are happy with your edits, tap on ‘Add’, and your new watch face will be added to your Apple Watch.

Step

4

Remove

If you would like to remove a watch face using your iPhone, just select the face you want to get rid of, and at the bottom of the screen you should see an option that says ‘Remove’.

Tap on this, and the watch face will be removed from the collection.

Final Thoughts 

Apple watches are great – even better when just how you want them to be to match your own style – and as mentioned there are a variety of models to choose from.

If you are an iPhone user, having an Apple Watch will enable you to access a variety of features including fitness and health tracking. It will also give you the convenience of seeing messages, calls and notifications right on your wrist. All on a watch face which can reflect your own personality or practical needs.

Update the detailed information about How To Use Dual Sim With Apple Watch Gps + Cellular Models on the Tai-facebook.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!