You are reading the article How To Install Cwm And Twrp Recovery On Xperia Z updated in November 2023 on the website Tai-facebook.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 How To Install Cwm And Twrp Recovery On Xperia Z
Lots of customization on Android devices like custom ROMs, themes, utility mods and a heck lot more cool tweaks; they all come packed in a zipped file, which can only be flashed/installed using a custom recovery. And only custom recovery. You can’t use the stock Android 3e recovery that comes pre-installed on your device because it only allows you to flash signed official updates, not custom made zips.
Installing a custom recovery on Xperia Z is fairly easy. And thanks to the huge community of third-party developers for making it possible to install recoveries even on bootloader locked devices and that too just as easy as it’s done on bootloader unlocked devices.
A custom recovery also let’s you take a Nandroid backup of your device — the ultimate backup which restores your device to the exact same environment you took the backup in; it literally puts everything back in.
Types of custom recoveries
ClockWorkMod (CWM) recovery: It’s the most popular custom recovery and his been around since the early days of Android. CWM comes in both Non-touch and Touch versions, however you’ll find the non-touch CWM to be more compatible and available.
Recovery for bootloader unlocked Xperia Z
The recoveries shared below are only for official Sony firmwares or modified official firmwares and may not work on AOSP based ROMs. However you can use these recoveries to flash AOSP based ROMs like CM 10.2 and similar ROMs.
CWM Recovery
Recoveries are installed on Xperia Z using a custom kernel. And these custom kernels are firmware specific. So for example, if your phone is running on firmware version 10.3.1.A.0.244, then you need to flash the kernel specific for that firmware. Below are download links for all firmwares, but before downloading make sure to check your phone’s firmware version.
Check your phone’s firmware versionTo check firmware version on your Xperia Z. Go to Settings on your phone » select About phone » Look for Build number. The build number is the firmware version number.
Download CWM kernelOnce you’ve checked your device’s current firmware version, download the kernel specific for your firmware from the list below:
Instructions
We’ll use the 10.3.1.A.0.244 firmware for example in this guide. But you make sure to download and flash only the kernel specific for your firmware.
Extract the fastboot files you downloaded from the link above to a separate folder on your computer
└ You need to transfer the “boot.img” from CWM kernel’s zip file to the folder where you extracted fastboot files on your computer
Now connect your phone in fastboot mode
Switch off your phone
Hold the Volume UP key on your phone and connect it to PC using a USB cable
Type the command given below in command prompt window and hit enter to begin flashing the “boot.img” file fastboot flash boot boot.img
Disconnect your device and let it reboot automatically
Done!
How to boot into recovery
Switch off your Xperia Z first
Switch it back on and the time when you see your phone’s LED notification light turn purple or pink — start pressing either the Volume UP or Volume Down key a couple of times and your phone will reboot into recovery
Recovery for bootloader locked and unlocked Xperia Z
XZ Dual Recovery: CWM and TWRP recovery together
The XZ Dual Recovery lets you install both CWM and TWRP recovery simultaneously on your device. And it works on both bootloader unlocked and locked devices, and it also is the best way to get TWRP on your Xperia Z.
File name: lockeddualrecovery2.6.3-RELEASE.windows.zip
Installation instructions
Root required!To install XZ Dual Recovery on your Xperia Z you first need to root your device. Below is a link to a very detailed guide for rooting Xperia Z.
Link → How to Root Xperia Z
Unzip/extract the “lockeddualrecovery2.6.3-RELEASE.windows.zip” file (that we downloaded above) to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
Enable installation of apps from Unknown Sources: Open phone’s Settings » select Security » Tick the “Unknown sources” checkbox (under Device administration section)
Now from the files extracted in Step 1, execute the .bat file
Run “supersu.bat” file if you’ve SuperSU app installed on your phone
Grant SuperSU access (Root access) on your phone when the recovery installer window notifies you to do so (as shown in the screenshot above). And then, press any key on the installer screen to continue
Your device will reboot automatically now. And here you’ve to make sure that the first boot goes into recovery mode, here’s how
While booting up you’ll see your phone’s LED notification light turn purple or pink, so just when you see that — start pressing the Volume UP key a couple of times and your phone will reboot into CWM recovery
Do nothing once you’re in CWM recovery, just select “Reboot system now” option using the Power key
Close the installer window once it’s done with its job and shows you a “Press any key to continue..” message
That’s it! Dual recovery should be installed on your device now.
How to boot into recovery
Switch off your Xperia Z first
Switch it back on and the time when you see your phone’s LED notification light turn purple or pink, do the following
For CWM: Press Volume Up a couple of times
For TWRP: Press Volume Down a couple of times
Need help?
You're reading How To Install Cwm And Twrp Recovery On Xperia Z
How To Install Twrp On Xiaomi Phones In A Few Simple Steps
TWRP is a radically overhauled version of the aforesaid Recovery. Notably, you can perform tasks like rooting your device after installing TWRP on your Android device. Also, TWRP installation enables you to install a custom ROM. So, let’s take a look at how you can install TWRP on Xiaomi devices. Installing TWRP on your device is as simple as ABC. Nevertheless, you need to be extremely careful during the installation process.
How To Install TWRP On Xiaomi PhonesFirst off, make sure that you have an unlocked bootloader for your Xiaomi device. A bootloader lock is a system that protects the software of your device. So, unlocking the bootloader is an extremely important step. Notably, you will not be able to make any changes in the device’s software without first unlocking the bootloader. So, after the bootloader is unlocked, we can go to the next step to install TWRP on your Xiaomi device.
Unlocking BootloaderUnlocking the bootloader isn’t an arduous task. However, it can turn out to be a tricky process on Xiaomi devices. Also, you’d need to connect your device with your Mi Account to unlock the bootloader using a PC. Moreover, it is worth mentioning here that unlocking the bootloader will terminate your phone’s warranty. Also, it will erase the data stored on your handset. The bootloader unlocking process can also disable the cameras on a Samsung Galaxy Z Fold3 phone.
If you don’t have a Mi Account on your device, create one and sign in. Next, go to the developer options. Now, you need to enable OEM Unlocking here and select Mi Unlock status. The next step involves selecting the “Add account and device” option.
Important Things To Keep In MindMake sure that ADB & Fastboot libraries are installed on your computer. Now, download and install Mi Unlock Tool on your PC. Next, reboot your Android device into Fastboot mode. You will now be able to connect your phone to the PC.
Your device’s status and serial number will be visible as soon as you open Mi Unlock Tool. So, all you need to do is to press the unlock button to complete the bootloader unlocking process. However, all the data stored on your phone will be erased during this process. So, ensure that you’ve taken a backup before you start the bootloader unlocking process.
How To Install TWRP On A DeviceNow, your device is ready. You can start the TWRP installation process from CMD (command shell) and bootloader screen. Also, you’d need ADB & Fastboot library to complete the TWRP installation process. However, the installation process for the A/B and non-A/B devices is different. A/B system updates (or seamless updates) were a project Google introduced with Android 7 (Nougat) in 2023.
A/B system updates will keep the booting system workable on disk during the OTA (over-the-air) update. This will minimize the chances of an inactive device post update. So, it reduces the likelihood of frequent device replacements. Also, it reduces device reflashes at warranty and repair centers. Notably, there are two types of TWRP installations you can choose from.
Gizchina News of the weekThe partition table on non-A/B devices features a recovery partition. So, you can install TWRP directly from fastboot on non-A/B devices such as the Redmi Note 8. To recap, Xiaomi rolled out the Android 11 update with MIUI 12 and virtual RAM for the Note 8 last year. However, the A/B devices do not have a recovery partition. As a result, the ram disk will be patched in boot images (boot_a boot_b).
TWRP Installation On Non-A/B DevicesSeveral non-A/B devices adopt a simple TWRP installation process. First off, you’d need to download TWRP that is compatible with your Xiaomi device from TWRP’s official website. Now, reboot the device into bootloader mode after downloading the TWRP image. Next, simply connect the device to your PC.
So, the device will be connected to a computer in bootloader mode. You can now open CMD in the image folder in TWRP. Now, run the “fastboot flash recovery filename.img” command once the process is completed. Now, run the “fastboot reboot recovery” command to reboot the device in recovery mode. This will successfully install TWRP on a non-A/B Xiaomi device.
TWRP Installation On A/B DevicesInstalling TWRP on an A/B device is more time-consuming than TWRP Installation on a non-A/B device. However, it is a simple process. First, you’d need to boot TWRP. Next, flash the TWRP installer zip file that is compatible with your device. This zip file will patch ramdisks in all slots. So, this will help you install TWRP on your device. You can download the TWRP installer zip file from the official TWRP website.
Likewise, you can download TWRP images from the same site. Now, simply reboot your device into fastboot mode. Once the device has rebooted, run the “fastboot boot filename.img” command. This will ensure that the device boots in TWRP mode. However, you need to bear in mind this is a one-time use “boot” command. You’d need a TWRP installer for permanent installation.
An Improved ExperienceNow, go “Install” section and find the “twrp-installer-3.xx-x.zip” file you previously downloaded. Install the aforesaid file from your PC with ADB sideload. TWRP will install in both parts after the operation is complete. So, you have successfully installed TWRP on your Xiaomi phones. TWRP recovery is available on your Xiaomi phone. This will enhance your overall experience.
The highly useful TWRP project enables you to recover and backup your data from here. This is a handy feature in case of a failure. Also, this will allow you to effortlessly root your device with TWRP. Aside from this, you can take a backup of data on your device. Further, you can even install custom ROM on the device.
Htc One Clockworkmod Recovery (Cwm) Guide
It’s inspiring how fast the amazing developers at the XDA development community work at releasing hacks for various devices, sometimes even before the device gets released, as is the case with the soon to be released HTC One. The popular custom recovery – ClockworkMod (CWM) – is already out for the HTC’s 2013 flagship, paving the way for custom ROMs for the device.
But what is ClockworkMod recovery? ClockworkMod recovery (abbreviated as CWM) is the most popular custom recovery for Android devices, developed by Koushik “Koush” Dutta. CWM recovery replaces the stock recovery that is present on every Android device and extends its functionality with a lot more features and options.
The one thing that CWM is mostly used for is flashing custom ROMs on devices, which are basically custom versions of Android that replace the default software that a manufacturer puts on their devices. Other functions of CWM include the ability to factory reset a device, backup and restore a device’s ROM, and flash custom kernels, hacks, and mods.
So if you’re looking to install CWM recovery on the HTC One but need a little help, you’ve come to the right place – our all-in-one guide for the HTC One has easy to understand step-by-step instructions to help you through the procedure to install CWM.
However, there are a few things you must know before you proceed with installing CWM recovery on your device:
Flashing a custom recovery requires unlocking the bootloader on the phone, which permanently voids warranty.
Unlocking the bootloader will wipe all data on the phone, including personal content on the internal storage such photos, music, videos and other files. You can take a backup of everything though and restore it later on.
Accepting official over-the-air software upgrades from HTC might cause issues, so you’ll have to refrain from installing any official updates after flashing recovery (and also unlocking the bootloader).
So make sure you’re okay with the risks involved in flashing a custom recovery as given above, then continue reading below to find out to CWM recovery can be installed on the HTC One.
Compatibility
The procedure described below is only for the HTC One. Do not try it on any other device.
Warning!
The methods and procedures discussed here are considered risky, so try them out at your own risk, and make sure to read each step carefully before attempting anything. We will not be held responsible if anything goes wrong.
Requirements
NOTE: Backup is optional and you can skip this step if you do not wish to back up anything.
Download HTC Sync Manager
NOTE: Skip this step if the HTC Sync software is already installed on your computer.
Unlock the bootloader on your phone using this guide. Unlocking bootloader wipes all data from the phone so make sure you take a backup as mentioned in step 1.
NOTE: If you’ve already unlocked the bootloader on your device, you can skip this step.
Make sure the “Fast Boot” option is disabled in the phone’s Settings » Power menu. If it is enabled, you’ll be unable to make the phone boot into the required mode for flashing recovery.
Flash CWM Recovery
Extract the Fastboot.zip file on your computer to get a folder named Fastboot with four files inside it.
Download the touch version of CWM recovery from the source page. The file should be named something like “recovery-clockwork-touch-*.*.*-m7.img”, where *.*.* will be the current version of recovery.
Copy the CWM file that you downloaded to the Fastboot folder so that you now have a total of 5 files inside.
Turn off your phone. Then, boot into HBOOT/bootloader mode by holding down the Volume down + Power buttons together till the screen turns on. Then, press the power button once to select “FASTBOOT”, after which “HBOOT” will change into “FASTBOOT USB”.
Then, connect your phone to the computer with your USB cable, then wait for Windows to finish installing the drivers (drivers will be installed only the first time you connect the phone to the computer). For reliability, ensure that you use a USB port at the back if you are using a desktop computer, as the front panel ports can be loose and cause problems.
Now, perform the following steps in the command prompt to flash CWM.
Type in fastboot devices in the command prompt and press Enter. If your phone has been detected properly, you will see a device ID show up in command prompt. If nothing comes up, make sure you have installed the drivers, disconnect phone, remove and re-insert battery, and retry the procedure from step 5.
Now, flash CWM recovery on the phone by entering fastboot flash recovery *filename*.img in the command prompt, where *filename* has to be replaced by the name of the recovery file that you have downloaded. For example: fastboot flash recovery recovery-clockwork-touch-6.0.0.0-m7.img
After the recovery is flashed, you’ll get a finished/OKAY message in command prompt.
Disconnect the phone, then using volume button, scroll down to highlight “HBOOT”, then select it using the power button.
Then, highlight the “RECOVERY” option, then press power button to reboot the phone into CWM recovery. Once recovery boots up, simply select the “reboot system now” option to reboot the phone into Android.
ClockworkMod recovery is now installed on your HTC One. Make sure to read the “Booting into ClockworkMod Recovery” section below to find out how you can boot into CWM when needed.
Booting into ClockworkMod Recovery
Whenever you want to use CWM recovery, you can boot into it via Fastboot mode. The procedure to boot into CWM recovery is given below.
Turn off the phone.
Then, boot into HBOOT/bootloader mode by holding down the Volume down + Power buttons together till the screen turns on.
Press the Volume Down key a few times till “RECOVERY” is highlighted, then press the power button to select this option. The phone will then reboot into CWM recovery, where you can tap on options to select them.
Rebooting back into Android from CWM recovery can be done by selecting the “reboot system now” option in the main menu of CWM.
Latest Clockworkmod (Cwm) Recovery For T
HTC One being a flagship device, is neither forgotten by the OEMs nor by the developers. With the KitKat being incompatible with TWRP, there isn’t much of a choice left. But, updated ClockworkMod recovery has started rolling out for various devices to eradicate the in-compatibility issue.
T-Mobile HTC One has received for both of CWM’s touch and non-touch recovery which will be compatible with all KitKat ROMs like CyanogenMod 11, OmniRom, SlimKat, etc.
At the time of posting, the latest version of CWM is 6.0.4.3 for the T-Mobile variant of HTC One. But, of course, this version won’t stay latest for ever. So, if we miss out, do let us know so that we may update the post as required.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be m7tmo!
Do not use the procedures discussed here on any device of HTC or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install CWM recovery on your T-Mobile HTC One in order to avoid any complications later, and have a smooth and successful process.
BACK UP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
INSTALL HTC ONE DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully install a firmware on your T-Mobile HTC One. In case you’re not sure, follow the link below for a definitive guide for installing driver for your HTC One on your computer.
► HTC ONE DRIVERS (ADB and Fastboot) INSTALLATION GUIDE
CHARGE YOUR DEVICEIf your android device powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure your device is adequately charged — at least 50% battery of the device.
GUIDE: HTC ONE M7TMO CWM RECOVERY
DOWNLOADS
Download the either of the Installer file, for Touch edition and Non-touch edition of CWM recovery for your HTC One.
File name: htc-one-m7tmo-touch-cwm-recovery-installer.zip (8.8 MB)
File name: htc-one-m7tmo-cwm-recovery-installer.zip (8.8 MB)
STEP-BY-STEP GUIDE
You need to unlock bootloader of your HTC One first to be able to install CWM recovery. Since unlocking bootloader would completely wipe (delete everything) on your HTC One, be sure to backup your phone adequately before attempting to unlock bootloader and install custom recovery. Link – HTC ONE BOOTLOADER UNLOCKING GUIDE.
Prepare your phone:
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).
Extract the installer file (using 7-zip, preferably). For touch edition, it’s chúng tôi And for Non-touch edition it’s chúng tôi You’ll get the following files, and one folder:
api (folder)
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
recovery-clockwork-touch-6.0.4.3-m7tmo.img (or) recovery-clockwork-6.0.4.3-m7tmo.img.
source.properties
Boot into recovery mode. For this:
Power off your device and wait 4-5 seconds after lights go off
Press and hold Volume Down button then press the Power button to switch on your phone and release it, but keep holding the Volume Down button.
└ In Bootloader and Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
That’s all!
Your suggestions are most welcomed!
Micromax A89 Clockworkmod (Cwm) Recovery Version 6.0.1.5: Downloads And Guide
Android recovery is a software image that allows to take backups of the phone and restore them whenever you want.
Also it enables users to flash various Custom roms and mods that will enhance the performance of the phone.
So this guide takes you on a tour of installing the CWM recovery on Micromax A89.
At the time of posting this, the latest version of CWM Recovery available for Micromax A89 is 6.0.1.5.
WARNING!
Recovery may void the manufacturer warranty, we are not responsible for any damage that occurs to the phone in any case. So Proceed at your own risk.
Flashing Recoveries that are not intended to your phone may lead to damage so confirm your device model first.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be A89!
Do not try this on any other device of Micromax or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to root your Micromax A89 in order to avoid any complications later, and have a smooth and successful process.
BACK UP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
INSTALL MICROMAX A89 DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully root your Micromax A89.
In case you’re not sure, follow the link below for a definitive guide on installing working driver on Micromax A89.
ROOTING MICORMAX A89The Method 2 below, using the Mobile Uncle (MTK) Tools android app, needs root access on your device.
If you have to use that method, first follow the below guide for rooting the Micromax A89 as a pre-requisite.
►ROOT MICROMAX A89
OTHER THINGS TO TAKE CARE OF:└ Always keep your phone charged while playing around with your phone in a serious way.
└ Use proper cables to connect it to the PC so that no connection loss occurs during the process.
└ If you have the problem rooting try connecting the phone as media device.
GUIDE : MICROMAX A89 CWM RECOVERY
DOWNLOADS
CWM RECOVERY FILE SP FLASH TOOL (for Method 1) MOBILE UNCLE MTK TOOLS ANDROID APP (for Method 2)DOWNLOAD LINK
STEP-BY-STEP GUIDE
METHOD 1: SP FLASH TOOL
Prepare your phone:
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).
Now extract the CWM RECOVERY FILE package. It will contain two files.
MT6577_Android_scatter_emmc.txt
recovery.img
Now again switch off the device and press Volume up + power button to enter into recovery mode. Voila you now have the CWM recovery.
That’s it.
To boot into recovery mode, simply use an app like Quick Boot android app.
Just in case the SP Flash method to install TWRP recovery on yur Micromax A89 fails you, look forward to another method install TWRP recovery by using the Mobile Uncle MTK Tools android app, as given below.
METHOD 2: MOBILE UNCLE MTK TOOLS ANDROID APP
Download the CWM package provided above and extract it. It contains two files.
MT6577_Android_scatter_emmc.txt
recovery.img
Congrats, you have successfully installed the CWM recovery on your device.
That’s it.
To boot into recovery mode, simply use an app like Quick Boot android app.
FEEDBACK US!
Your feedback is welcomed!
Via XDA
Twrp Recovery For Verizon Galaxy Note 4 Sm
TeamWin team just released TWRP recovery for the Verizon Galaxy Note 4 Developer Edition. The device comes with an unlocked bootloader, unlike its retail brother which comes locked and is hard/impossible to root or flash custom recoveries.
Verizon released the developer edition Galaxy Note 4 only a couple of weeks ago and we already have Root and TWRP recovery for the device. Chainfire, the developer of cf-auto-root released root for the Verizon Galaxy Note 4 dev edition last week.
READ: How to Root Verizon Galaxy Note 4 Developer Edition
With TWRP recovery on your Verizon Note 4, you can now install custom ROMs on your device or take nandroid backup. Also, this is TWRP 2.8 which allows you to connect your Note 4 in MTP mode even from recovery. So, as it often happens, you don’t have to reboot your phone to copy a zip file that you want to flash but forgot to transfer on the phone.
TWRP recovery is also theme-able. There are a ton of cool TWRP themes from various third-party party developers that you can flash to change the looks of recovery installed on your phone.
Verizon Galaxy Note 4 TWRP recovery comes in both .zip and Oin flashable .yar file. We don’t have a custom recovery already installed on our Note 4 so we’ll be using the Odin method for flashing TWRP on Verizon Note 4.
Without further ado, let’s see how to install TWRP recovey on your Note 4.
TWRP RECOVERY INFO
Name TWRP Recovery
Version 2.8.1.1
Stability Good
Credits TeamWin
DOWNLOADS
File name: Odin_3.10.0.zip
File name: openrecovery-twrp-2.8.1.0-trltecan.img.tar
WARNING: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Important Note: Backup important files stored on internal SD card of your device, so that in case a situation occurs requiring you to do a factory reset after rooting, which might delete internal sd card too, your files will remain safe on your PC.
INSTALLATION INSTRUCTIONS
Make sure you’re installing this on a Verizon Galaxy Note 4 Developer Edition, do NOT try this on any other variant or device from Samsung.
Extract/Unzip the Odin_3.10.0.zip file on your PC, you’ll get the following file “Odin3 v3.10.0.exe”.
Boot your Galaxy Note 4 into download mode:
Completely Switch off your Galaxy Note 4
Press and hold “Volume Down + Home + Power” button together until you see a warning screen appear on your Note 4.
└ Check this page for more options to boot into download mode.
Connect your Verizon Galaxy Note 4 to PC using an authentic USB Cable, we recommend using the original cable that came packed in box with your Note 4.
└ Get Galaxy Note 4 drivers from here
Now make sure Re-Partition box is unchecked and “Auto Reboot” and “F. Reset Time” boxes remain checked, while all other boxes remain unchecked.
Re-Check the above stop to avoid any errors while flash the TWRP recovery file
If you see FAIL message instead of the RESET or PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
That’s it. TWRP Recovery should now be installed on your Galaxy Note 4.
BOOTING INTO RECOVERY MODE
Completely Switch off your Galaxy Note 4.
Press and hold “Volume UP + Home + Power” button together and release them as soon as you see Samsung Galaxy Note 4 logo on the screen.
There are a few more ways to boot into recovery mode, check them out here: → How to Boot into Galaxy Note 4 Recovery Mode.
Update the detailed information about How To Install Cwm And Twrp Recovery On Xperia Z on the Tai-facebook.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!