You are reading the article Error 0Xc0000142, The Application Was Unable To Start Correctly In Windows 11/10 updated in December 2023 on the website Tai-facebook.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Error 0Xc0000142, The Application Was Unable To Start Correctly In Windows 11/10
You may have come across a moment when you tried to open an application, and it failed to open, throwing up instead an error message The application was unable to start correctly (0xc0000142). If you receive this error, then this post may interest you.
Today, we are focussing on this error when opening the Command Prompt. The Command Prompt is usually one of the constant while fixing different types of errors on Windows 10. But what if the same Command Prompt encounters the same error? It becomes really difficult to fix these kinds of errors. But it is not impossible to do so. There are a number of factors that are causes of these kinds of errors. Some third-party programs, malware, and other factors come under this category. We will try every potential fix in order to fix this error.
Says Microsoft,
There are primarily 3 actions that can cause this error:
Launching lots of applications
Launching an application as a different user
Launching an application to a different desktop
If you are wondering what the error 0xc0000142 means in the above Message Box, you can find the error in ntstatus.h. It is STATUS_DLL_INIT_FAILED or “{DLL Initialization Failed} Initialization of the dynamic link library %hs failed. The process is terminating abnormally.”
The application was unable to start correctly (0xc0000142)We will be trying the following potential fixes to try fixing error 0xc0000142 for the Command Prompt on Windows 11/10:
Re-register ALL the DLL files
Run SFC and DISM
Troubleshoot in Clean Boot State.
Fix the Registry Entry.
Check Group Policy setting.
I recommended you create a System Restore Point. This is because while doing these types of modifications, there are chances that something breaks on the software side of your computer. Or, if you do not have any habit to make a system restore point, I would encourage you to create one frequently.
1] Re-register ALL the DLL filesThen type in the following and hit Enter:
for %1 in (*.dll) do regsvr32 /s %1This will re-register ALL the DLL files.
You should be doing this as soon as you boot into Windows 11/10 or do it after booting into Safe Mode.
After you are done, Reboot your computer and check if the error is now fixed or not.
Fix: chúng tôi Application Error 0xc0000142
2] Run SFC and DISM 3] Troubleshoot in Clean Boot StateTroubleshooting in Clean Boot State always holds the potential to fix a lot of errors related to the System. You can read more about this in our guide on how to Perform a Clean Boot.
Fix: Blue Screen error 0xc0000142 on Windows 11/10
4] Check Registry settingOnce Registry Editor opens, navigate to the following key location-
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRunNow delete the segments of the programs from the right side panel. These segments include the DWORD Values and other entries made by the conflicting program in the mentioned location inside of the Registry Editor.
You may want to also check the following key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersion WindowsLoadAppInit_DLLsChange value of LoadAppInit_DLLs from 1 to 0.
After you are done deleting, close the Registry Editor and Reboot your computer for the changes to take effect.
Fix: Office application error 0xc0000142.
5] Check Group Policy settingOpen Run box, type chúng tôi and hit Enter to open the Local Group Policy Editor. Navigate to the following path:
User Configuration/Administrative Templates/System
This policy setting prevents users from running the interactive command prompt, Cmd.exe. This policy setting also determines whether batch files (.cmd and .bat) can run on the computer. If you enable this policy setting and the user tries to open a command window, the system displays a message explaining that a setting prevents the action. If you disable this policy setting or do not configure it, users can run chúng tôi and batch files normally.
Here, you can also Disable the command prompt script processing also, if you wish.
Hope this post helps you. Advanced users may want to read this post on MSDN.
Other similar The application was unable to start correctly errors:
The application failed to initialize properly (0xc0000135)
The application failed to initialize properly 0xc0000005
The application was unable to start correctly (0xc0000022)
The application was unable to start correctly (0xc0000018)
The application was unable to start correctly (0xc0000017)
The application was unable to start correctly (0xc00007b).
You're reading Error 0Xc0000142, The Application Was Unable To Start Correctly In Windows 11/10
Windows Was Unable To Create A Required Installation Folder, Error 0X8030002F
If you see the message Windows was unable to create a required installation folder, Error 0x8030002F during Windows installation or upgrade process, then this post will be able to help you resolve the issue. You need to follow all these solutions one after one to get rid of this problem.
The entire error message says:
Windows was unable to create a required installation folder, Please reconfigure your chúng tôi file to use the flag 9 setting for the first image, and restart your installation, Error Code 0x8030002F.
Fix Error 0x8030002F, Windows was unable to create a required installation folderTo fix Windows was unable to create a required installation folder error, follow these steps:
Rebuild BCD
Re-create installation media
Run CHKDSK
Disable security software
Unplug external devices
To learn more about these steps, continue reading.
1] Rebuild BCDThe first thing you need to do in order to fix the Windows was unable to create a required installation folder error while installing Windows 11 or Windows 10 is to rebuild BCD or Boot Configuration Data.. As BCD of Boot Configuration Data is a kind of database, which stores boot-time configuration data, if it gets corrupted, you won’t be able to continue the installation. Therefore, it is better to rebuild the BCD in order to get rid of this problem. For that, you need to use this command: bootrec /rebuildbcd.
2] Re-create installation mediaIf you are using a customized version of Windows 11/10 ISO, there is a chance of getting this error. Therefore, it is better to re-create the installation media and try again. You can follow this guide to download the ISO from the official website and create the Windows 11 bootable installation media.
3] Run CHKDSKThis problem might occur when you have a corrupted hard drive, or there are some issues on your hard disk. If so, chkdsk is probably the best way to get rid of that problem. However, you need to run this utility via Command Prompt. To use chkdsk using Command Prompt, follow this guide.
4] Disable security softwareAt times, additional security software could cause this issue on your computer. If you recently installed a security shield on your PC and the error started occurring after that, it is recommended to disable the security software. It could be an antivirus, adware removal tool, firewall software, app blocker, etc.
5] Unplug external devicesIf you have plugged in multiple external devices, such as a USB drive, USB cable, external hard drive, Ethernet adapter, Wi-Fi adapter, etc., it is recommended to disconnect them all except the required one. There could be times when those devices might create a conflict while installing the operating system. If that happens, there is a chance of getting the aforementioned error message. If so, you can troubleshoot the issue by unplugging all the external devices from your computer.
Related: Windows was unable to locate required install file boot.wim.
How do I fix error code 0x8030002F?To fix the error code 0x8030002F on Windows 11/10, you need to follow the aforementioned tips and tricks. You need to start the troubleshooting process by unplugging all the external devices and disabling the security software you installed externally. Following that, you must reconfigure Boot Configuration Data.
How do I fix Windows was unable to create a required installation directory?To fix Windows was unable to create a required installation directory or folder, you can go through the above-mentioned solutions. It is required to rebuild the Boot Configuration Data on your computer, which you can do with the help of Command Prompt. If that doesn’t resolve the issue, you might need to re-create the installation media and restart the installation process.
Fix Unable To Display Current Owner Error On Windows 11/10
Unable to display current owner on WindowsThe causes could be many:
A software used to lock folders might be preventing the change in permissions.
The file or folder for which you which to change the permissions might be corrupt.
The Administrator account might not have been activated.
This situation could be problematic especially if the file or folder in question is important. Since the file/folder doesn’t have an owner, no one is technically authorized to change its properties. To resolve this issue, try these suggestions:
Run the Shared Folders Troubleshooter
Uninstall any software which locks folders on the system
Run the CHKDSK command
Enable the Administrator account via elevated Command Prompt
Take ownership of file/folder through Command Prompt
Run the Diagnostic Startup.
You could try the following solutions sequentially to resolve the problem:
1] Run Shared Folders TroubleshooterBefore proceeding to more complicated solutions, you could try running the Shared Folders Troubleshooter as follows:
Select the Shared Folders troubleshooter from the list and run it.
Restart the system once done.
2] Uninstall any software which locks folders on the systemA few software products which can lock folders could be active even when they are not activated. If you are facing the issue in discussion, you might consider uninstalling any such software.
Restart the system.
3] Run the CHKDSK /f commandThe CHKDSK utility helps in checking for bad sectors on the hard drive and fix them if possible. An error in the File System could cause the issue in discussion and running the CHKDSK /f scan could fix it.
Type the command CHKDSK /f in the elevate Command Prompt window and hit Enter to execute it.
Restart the system once the command has executed.
When you restart the system, the CHKDSK scan will process before booting into the system.
4] Enable Administrator account via elevated Command PromptIf the administrator is the sole owner of the problematic file or folder and the Administrator account is not enabled, you could encounter the error “Unable to display current owner.”
The procedure to enable the Administrator account is as follows:
Search for Command Prompt in the Windows search bar.
In the Command Prompt window, type the following command and press Enter to execute it:
net user administrator /active:yesRestart the system, and you would get an option to enter Windows as the Administrator.
5] Take ownership of file/folder through Command PromptOpen the elevated Command Prompt as explained in solution 4.
Type the following command in the elevated Command Prompt window and press Enter to execute it:
If it is successful, restart the system and access the file/folder.
Please remember that commands mentioned in solution 4 enabled the Administrator account and we needed it for solution five too. Once the job is done, you could disable the Administrator account by typing the following command in elevated Command Prompt:
net user administrator /active:noOnce the command has successfully executed, restart the system and login as the intended user to access the file/folder in the discussion.
6] Run Diagnostic startupIn case any drivers or services are interfering and causing the problem, we could try running the system in Diagnostic startup mode. In this mode, the system will boot with minimal drivers, services, etc.
Press Win + R and type the command msconfig. Press Enter to open the System Configuration window.
In the General tab, select Diagnostic startup. Hit Apply and then OK to save the settings.
Restart your system after saving the settings.
Once the system restarts, try accessing the file/folder in the discussion.
If you are still unable to access the problematic file/folder, repeat solution 4 in Diagnostic startup mode.
Once you are done with the troubleshooting, you could change the option to Normal startup in the System Configuration window.
Related: Unable to set new Owner on OS, Access is denied.
Hope it helps!
Unable To Start The Game On Ubisoft Connect
If you are unable to start the game or unable to locate the game on Ubisoft Connect then here is a complete guide that shows you multiple fixes to resolve the error. Ubisoft Connect is a game launcher to run Ubisoft games. A lot of users have recently reported being experiencing the Unable to start the game error when trying to launch a game. The error prompts the following message when triggered:
Have you moved your game and/or its files? If so, select the folder where the game is now located.
Now, if you are facing the same error, this guide will help. Try out the fixes we have mentioned and get rid of the error.
Why doesn’t my game start on Ubisoft Connect?There can be different reasons why your game doesn’t start on Ubisoft Connect and you receive Unable to start the game error. For example:
It can be caused because of missing due administrator privilege to run the game. Hence, try launching the launcher with administrator rights to fix the error.
The error can be triggered due to a compatibility issue with a particular game. So, you can run the launcher in compatibility mode to resolve the error.
It can also be triggered due to outdated and faulty graphics drivers. So, make sure you have updated your graphics drivers to the latest version.
It can also occur if you are dealing with corrupted game files. In that case, verify the game files to fix the error.
Another potential cause can be the fact that your antivirus is blocking the game from launching. So, disable your antivirus and see if the error is fixed or not.
One more reason can be the corrupted Ubisoft Connect cache. If the scenario is applicable, clear the cache files to fix the error.
If the installation of the Ubisoft Connect client is corrupted, you might encounter this error. Hence, try reinstalling the launcher application and see if the error is fixed or not.
Unable to start the game on Ubisoft ConnectHere are the methods you can try to fix the Unable to start the game or Unable to locate game error on Ubisoft Connect (UPlay or Ubisoft Game Launcher):
Launch Ubisoft Connect as an administrator.
Run Ubisoft Connect in Compatibility mode
Update GPU card drivers.
Verify the game files.
Temporarily disable your antivirus.
Clear the Ubisoft Connect cache.
Reinstall the Ubisoft Connect client.
Let us discuss the above solutions in detail now!
1] Launch Ubisoft Connect as an administrator
Firstly, go to the Ubisoft Connect’s shortcut icon on the desktop or open its installation directory in File Explorer.
Next, move to the Compatibility tab and then enable the checkbox associated with Run this program as an administrator option.
Finally, try relaunching the Ubisoft Connect client and see if the error is fixed or not.
If the error still persists, you can try the next potential fix.
2] Run Ubisoft Connect in Compatibility modeIf the above solution doesn’t work, you can try running Ubisoft Connect in Compatibility mode in addition to the above fix. This might work for you in case the error is occurred due to some compatibility issue while launching a particular game. So, try running the launcher in compatibility mode and see if the error is fixed or not. Here is how you can do that:
Now, navigate to the Compatibility tab and enable the checkbox associated with the Run this program in compatibility mode option.
After that, select Windows 8 operating system from the drop-down.
Finally, run the launcher and see if the error is fixed or not.
In case the error still shows up, we got some more fixes for you. So, move down to the next potential solution to get rid of it.
Related: Ubisoft Connect Launcher not launching on Windows PC
3] Update GPU card driversThe gamers are aware of the fact that graphics drivers play a vital role in playing video games pm PC. It is extremely important to keep your graphics drivers up-to-date to avoid running into a launch error and other errors for games. Now, if this error is caused due to outdated or corrupted graphics drivers, you should be able to fix it by updating your graphics drivers.
You can try one of the below methods to update graphics drivers on Windows 11/10:
If you prefer installing the driver directly from the official source, you can visit the official website of the device manufacturer. Go to the website, search for your graphics driver with the model, download the latest driver installer, and then install the driver on your PC.
When done updating GPU card drivers, run the launcher and then try launching the game that was previously giving your the error. See if the error is fixed or not. If not, you can move on to the next solution to resolve the issue.
4] Verify the game filesThe error at hand can be caused if you are dealing with corrupted game files. In case you are facing this error with a specific game, you can try verifying the game files to fix the error. Here are the steps to do that:
Firstly, launch Ubisoft Connect PC and navigate to the Games tab.
Now, choose the problematic game, and from the left-side panel, select the Properties option.
On the next prompt, press the Repair button.
When the process is done, try launching the game and see if the error is fixed or not.
5] Temporarily disable your antivirusYour antivirus might be preventing the game from launching and thus causing the error at hand. If the scenario is applicable, try disabling your antivirus and then see if the error is fixed or not. If the error is fixed, you can be sure that your antivirus was causing the error. So, you can try adding the Ubisoft Connect executable file to the exception/exclusion list of your antivirus.
5] Clear the Ubisoft Connect cacheIf the error is caused due to corrupted temporary configurations and preferences (cache files) associated with Ubisoft Connect, you can try clearing the cache to fix the error. Here is how to do that:
Firstly, open File Explorer using Win+E and then navigate to the installation directory of Ubisoft Connect.
Note: Do take a backup of all the files in some other location to be on a safer side.
Finally, reboot your PC and then see if the error is resolved or not.
If the problem still occurs, you can follow the next potential fix.
6] Reinstall the Ubisoft Connect client How do I launch Games on Ubisoft Connect?To launch a game on Ubisoft Connect, make sure you have activated it to play it. To activate a game, jump to the Ubisoft+ tab in Ubisoft Connect PC. Look for your game and tap on the down arrow icon of the game. This will activate the game and add it to your library so that you can download and install it. Once done, access the Games tab in Ubisoft Connect PC. There, in the My Games list, select your game for playing.
Now read: Fix Ubisoft Connect app not working on Windows PC.
Bugcode Id Driver Error In Windows 10/11
BUGCODE ID DRIVER error in Windows 10/11 [Fixed by Experts]
444
Share
X
The
BUGCODE_
ID_
DRIVER error in Windows 10 is often caused by hardware problems, such as your computer RAM.
To fix this issue, make sure to update all your drivers, manually or using dedicated software.
You should also try to run the Windows built-in troubleshooting tools in order to solve this error.
Check for any
incompatible software that you may have installed lately on your computer.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
Blue Screen of Death errors can appear on almost any version of Windows, and, unfortunately, Windows 10 is no exception from these types of issues.
These errors can be sometimes hard to diagnose and harder to fix, and they tend to cause a lot of problems since they will restart your PC in order to prevent damage.
Since these BSoD errors tend to cause so much trouble for your computer, today we’re going to show you how to fix BUGCODE ID DRIVER error.
How do I fix the BUGCODE ID DRIVER BSoD error?If you want to prevent BSoD errors from appearing, we strongly suggest that you keep your Windows 10 up to date with the latest drivers.
Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.
Sometimes, malfunctioning drivers can cause multiple system errors.
If this happens to your PC, you may need to update or reinstall certain drivers entirely. As the process is not quite straightforward, we recommend using a reliable driver updater for the job. Here’s how to do it:
Download and install Outbyte Driver Updater.
Launch the software.
Wait for the app to detect all faulty drivers.
Now, it will show you all the malfunctioning drivers listed to select the ones to Update or Ignore.
Restart your PC to ensure the applied changes.
Outbyte Driver Updater
Secure your Windows PC with Outbyte from various errors caused by problematic drivers.
Free trial Download now
Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.
1. Update your Windows 10Windows 10 has a few minor issues with certain hardware and software, and sometimes these issues can cause Blue Screen of Death errors such as BUGCODE_ID_DRIVER to appear.
Microsoft is aware of these issues, and it’s working hard to fix them, and in fact, many of these issues are fixed by using Windows Update.
New patches are being released frequently and many of these patches offer new features, security improvements, and various bug fixes related to both hardware and software.
If the Windows 10 update is not working on your computer, use our comprehensive guide to troubleshoot and solve the issue.
3. Run
the hardware troubleshooter
Windows 10’s built-in troubleshooter can be used for addressing various issues, including the BSOD errors. So, if updating your drivers didn’t resolve the problem, let’s try this tool.
Windows troubleshooter is a great tool when you want to find the cause of an issue. However, if it has stopped working and does not finish the process, use our dedicated guide to solve the error.
4. Run
the SFC scan
Open the Windows search bar and type
cmd
.
Open Command Prompt (Admin).
Enter the following line and press Enter: sfc/scannow
Wait until the process is done (it may take a while).
If the solution is found, it will automatically be applied.
Now, close the Command Prompt and restart your computer.
If Windows 10’s troubleshooter didn’t get the job done, we’re going to try with the SFC scan. This command-line tool resolves various issues within the system, and it might be helpful.
Expert tip:
5. Run
the DISM tool
Follow the first 2 steps from the above solution.
Paste the following command and press Enter:
DISM /Online /Cleanup-Image /RestoreHealth
Wait until the scan is finished.
Restart your computer and try updating again.
Deployment Image Servicing and Management (DISM) is a powerful tool that freshly deploys the system image. And that process can eliminate potential BSOD issues.
6. Remove / disable problematic applicationsMany third-party applications can cause BSoD errors to appear, and in order to fix this error, you’ll have to find and remove the problematic applications.
The simplest way to do that is to perform a Clean boot by following the above steps. When your computer restarts, check if the error appears again.
If there’s no BSoD error, it means that one of the disabled applications or services was causing it. Now, all you have to do is to figure out what is the app causing issues.
To find the problematic service or application you’ll have to repeat the same steps, enable services and applications one by one until you find the one that is causing this problem.
7. Reset your Windows 10If this error is caused by certain software, you can fix it by performing Windows 10 reset. To complete Windows 10 reset, be sure to create a bootable USB flash drive by using Media Creation Tool.
After you’re done, you should have a clean installation of Windows 10, without any third-party software. If the error appears again, it means that it’s caused by your hardware.
8. Check your hardwarBlue Screen of Death errors such as BUGCODE ID DRIVER are often caused by your hardware, most commonly RAM, so be sure to test your RAM modules one by one until you find the faulty one.
Dust can fill your CPU or GPU fan, and that can increase the temperature of your PC and cause your system to crash, so be sure that your computer is clean from dust.
BUGCODE_ID_DRIVER Blue Screen of Death error can be a major problem, but you can usually fix this error by following the above steps provided in this guide.
Still experiencing issues?
Was this page helpful?
x
Start a conversation
How To Fix Upgrade Error 0X80070714 In Windows 10/11
How to fix upgrade error 0x80070714 in Windows 10/11
958
Share
X
First, run the Windows
Update
Troubleshooter.
That will reset various related services and it might address your problem.
Next, try to restart the
update
services
and delete the
content
from the
Software
Distribution folder.
Update errors can be a bit elusive because they can be caused by many reasons. Nevertheless, we have a cure for any of those in our Windows Update errors hub.
The Windows 10 errors hub was created especially to get you out of trouble when it comes to that kind of problem.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
The Fall Creators Update covers 75% of Windows 10 platform.
However, a lot of users that haven’t obtained 1709 version yet, are stuck with an incredibly unyielding problem which prevents the upgrade.
This error goes by the code 0x80070714 and it’s easily identified as the ERROR_RESOURCE_DATA_NOT_FOUND codename.
If this error trapped you in the never-ending upgrade loop, make sure to check the steps we provided below.
How do I resolve upgrade error 0x80070714 in Windows 10? 1: Run Update troubleshooterFirst things first. Even though this might seem like an unfitting workaround for the grave issue at hand, it might help you, nonetheless.
Windows Update Troubleshooter will, upon running, reset various related services and it might address your problem.
However, don’t hold high hopes, since this error mostly occurs when upgrading to major updates, thus it’s harder to address it than usual.
Here’s how to run Windows Update troubleshooter:
2: Reset update servicesMost of the time, the problem with the update errors in general concerns update-related services that tend to get stuck or unresponsive.
Furthermore, the folder in which all update-related files are stored and installed can be an issue, as well.
Installation files tend to get corrupted or incomplete, especially if there’s a presence of malware on your system.
net stop wuauserv
net stop bits
net stop cryptsvc
Ren %systemroot%SoftwareDistribution
Ren %systemroot%system32catroot2 chúng tôi
net start wuauserv
net start bits
net start cryptsvc
Restart your PC and try updating again.
Also, some knowledgeable users suggested disabling SQL service in Services. Allegedly, it seems that SQL blocks the upgrade for some reason. Here’s how to disable it:
In the Windows Search bar, type services, and open Services.
Disable all Microsoft SQL services you can find and try updating again.
3: Run DISMIf none of the previous steps get you out of a slump, the next obvious step is to utilize DISM.
Expert tip:
This tool’s main use is to, by employing system resources or an external source, locate and fix critical errors in system files.
As we already said, the corruption in update-related files is quite common, especially if the update size is as overwhelming as it is with major Creators updates.
Here’s how to run DISM in Windows 10, as simplified as it can be:
DISM /online /Cleanup-Image / ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
Wait until the procedure ends (it might take up to 10 minutes).
Restart your PC.
4: Use Media Creation ToolIf you’re unable to overcome the 0x80070714 error with the standard update procedure, there are still alternatives you can turn to.
Namely, Microsoft offers the Media Creation Tool which can be used to override the standard OTA updates.
Furthermore, you can use this tool to download and install the latest system version manually.
Follow these steps to do so:
5: Install updates via the installation mediaIn case even that fails, you can, by using the same tool, create an external install media , and install updates that way. This should exclude the possible issues within the system resources.
That way, you’ll use the data on the bootable USB or an ISO drive to install updates, rather than utilizing the system services mainly.
Here’s how to do it in a few steps:
6: Perform a clean reinstallationThe former is, of course, not a preferable step, taking into consideration that you’ll lose all of your customized preferences and applications.
On the other hand, you can disable major updates temporarily, and avoid further issues. Here’s how to do it in Windows 10:
Open Settings.
Choose Updates & Security.
Select Advanced options under the Windows Update.
Scroll down and toggle on Pause updates
Was this page helpful?
x
Start a conversation
Update the detailed information about Error 0Xc0000142, The Application Was Unable To Start Correctly In Windows 11/10 on the Tai-facebook.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!