Trending February 2024 # Batteryreport Not Working, Fails With Unexpected Errors 0X422, 0Xb7 Or 0X10D2 On Windows 11/10 # Suggested March 2024 # Top 2 Popular

You are reading the article Batteryreport Not Working, Fails With Unexpected Errors 0X422, 0Xb7 Or 0X10D2 On Windows 11/10 updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Batteryreport Not Working, Fails With Unexpected Errors 0X422, 0Xb7 Or 0X10D2 On Windows 11/10

If when you attempt to generate a battery health report using powercfg /batteryreport command on your Windows 11/10 system, you encounter either error 0x422, 0xb7 or 0x10d2, then this post is intended to help you.

Unable to perform operation, An unexpected error has occurred – Battery Report

When you encounter any of these errors, you’ll receive a full accompanying error message as follows:

Unable to perform operation. An unexpected error (0x422) has occurred: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

Unable to perform operation. An unexpected error (0x10d2) has occurred: The library, drive, or media pool is empty.

Unable to perform operation. An unexpected error (0xb7) has occurred: Cannot create a file when that file already exists.

Fix Battery Health Report errors

If you’re faced with any of the mentioned battery health report errors, you can try our recommended solutions below in no particular order and see which works for a particular error.

Update battery drivers

Run SFC scan

Run DISM scan

Delete previous .html-file of the Battery Report

Ensure Power Service is running

Enable Diagnostic Policy Service

Replace battery

Let’s take a look at the description of the process involved concerning each of the listed solutions.

Powercfg /batteryreport not working

Before you try any of the solutions below, check for updates and install any available bits on your Windows 11/10 PC and see if the error is resolved.

1] Update battery drivers

To update battery drivers on your Windows 11/10 PC, do the following:

Press Windows key + X to open the Power User Menu.

Tap M key on the keyboard to open Device Manager.

Expand the Batteries section.

Wait until the scan is complete. If a new driver version is found, follow the on-screen instructions to download & install it on your computer.

Restart your PC.

You can as well get the driver updates on the Optional Updates section under Windows Update.

2] Run SFC scan

This solution requires you to run an SFC scan and see if that helps.

3] Run DISM scan

Deployment Image Servicing and Management (DISM) is a powerful utility in fixing problematic Windows image files. Since corruption in these files might cause battery health report errors, you can run a DISM scan and see if that helps.

4] Delete the previous .html-file of the Battery Report

This solution requires you to delete the previous .html-file of the battery report in the current working directory. If the command was run from the default Command Prompt with admin rights — the report will be saved under C:WindowsSystem32 as battery-report.

To quickly access that location, open Run dialog, type the environment variable below into the box, and hit Enter:


If this solution doesn’t resolve the error, try the next solution.

5] Ensure Power Service is running

To ensure Power Service is enabled, do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type chúng tôi and hit Enter to open Services.

In the Services window, scroll and locate the System Protection Service service.

Make sure that the option under the Startup type menu in the service’s properties window is set to Automatic. Confirm any dialog boxes which may appear when changing the startup type.

Exit Services console.

Check if the error is resolved. Otherwise, try the next solution.

6] Enable Diagnostic Policy Service

Open Services.

In the Services window, scroll and locate the Diagnostic Policy Service.

Make sure that the option under the Startup type menu in the service’s properties window is set to Automatic. Confirm any dialog boxes which may appear when changing the startup type.

Exit Services console.

Check if the error is resolved.

7] Replace the battery

You will likely see several errors in your battery as it can no longer hold a proper charge.

By this time, it should be clear the battery is hitting the end of its life, but before deciding on replacing the battery, you can run battery diagnostics using third-party software and see what the result will show.

I hope this helps!

You're reading Batteryreport Not Working, Fails With Unexpected Errors 0X422, 0Xb7 Or 0X10D2 On Windows 11/10

Number Or Numeric Lock Is Not Working On Windows 11/10

Sometimes the Number lock (Num Lock Key) in Windows 11 and Windows 10 might not work even when it is enabled, making things inconvenient for those working with digits. If you are facing the same problem, you will find multiple solutions in this article. We have already seen what to do if the Num Lock is not working due to Fast Startup now let us see what we can do when it happens in the general case.

Num Lock not working on Windows 11/10

To fix Num Lock not working issue on Windows 11/10, follow these steps:

Troubleshoot in Clean Boot State

Update your Device Drivers

Install the Driver in Compatibility Mode

Turn Off Mouse Key

Registry Editor method

To know more about these steps, continue reading.

A Clean Boot is used to diagnose and later troubleshoot issues with your system. During a Clean Boot, we start the system with a minimal number of drivers and startup programs which helps isolate the cause with interfering software.

Once you have booted in the Clean Boot State, enable one process after another and see which process makes the problem appear. Thus you can find the offender.

2] Update your Device Drivers

Whenever any hardware shows a problem, we should be to update the device drivers. Open Devices Manager and update the Keyboard driver.

If that doesn’t work, you might consider downloading drivers directly from the manufacturer’s website and re-installing them.

TIP: NumBlock will help control, enable, disable Num Lock key.

If the existing drivers aren’t compatible even after an updating them, you could download them from the manufacturer website and install them in the Compatibility Mode and see if it works. Here is how to go about it.

Check the “Run this program in Compatibility mode” option.

Select a previous version supported by the software.

Install the driver as it is supposed to be installed.

Wait for the installation to complete and restart the device.

If the root cause of the problem is outdated drivers or incompatible drivers this method will surely solve the issue. You can visit the manufacturer website and download the up-to-date numeric keypad drivers. However, there is a chance that the drivers aren’t the problem at all. For this, there is the next method.

4] Turn Off Mouse Key

Try this and see if that helps:

Go to the Control Panel from the Start Menu.

Navigate to the Ease of Access Center.

Go to Make the keyboard easier to use.

Navigate to Control the mouse with the keyboard and uncheck the “Turn On Mouse Keys” option.

Basically, it might all boil down to a simple settings issue, which if true would be resolved in this step. You should be good to go.

5] Registry Editor method

There is yet another option you can use even though the mouse key method should work. If you want to use an elaborate method or if you actually need another solution, this is it. Remember, since you are making changes in the Windows Registry, it will be wise to create a System Restore point just in case anything goes amiss. After you’ve done that follow these steps.

Run regedit to open the Registry Editor.

Navigate to the following key:

HKEY_CURRENT_USERControl PanelKeyboard

Now navigate to this key:

HKEY_USERS.DEFAULTControl PanelKeyboard

Now set a registry string in the name InitialKeybaordIndicators and set the value to 2147483648.

Reboot the device.

Read: No Numpad? Emulate Numpad on keyboard in Windows

Why is my NumLock button not working?

There could be numerous reasons why the NumLock button is not working on your computer. Depending upon which device you are using, the solutions may vary slightly. For example, if you are using a laptop, you might need to check if there is any dust or not. On the other hand, if you are using a wireless keyboard, make sure that you have the charged battery.

Related: Enable Num Lock on startup or reboot in Windows 11/10.

How do I fix NumLock on Windows 11/10?

All the solutions are mentioned in this article to fix NumLock not working issue on Windows 11/10. Apart from these, you must verify if all the other buttons are working as well. If not, there could be some internal issues that might not be fixed at home. You also try setting the correct Registry value, installing the driver, updating the respective driver, etc.

Ubuntu Not Working On Windows 11: How To Fix Common Errors

Ubuntu Not Working on Windows 11: How to Fix Common Errors




Ubuntu is a Linux distribution that you can run on Windows 11 using WSL.

It is not error-free to install or use Ubuntu, but you can fix it by reinstalling or enabling its components.

0x80070032, 0x8007019e, and 0x800701bc are some of the most frequent Ubuntu errors reported by users.

Ubuntu is an open-source Linux distribution that can run on Windows 11, but some users have reported errors.

WSL is not designed for regular Windows users. It is for system administrators and developers who enjoy coding.

However, in some cases, when you want to run Ubuntu on Windows 11, you receive different error messages. These errors occur for many reasons, such as upgrading, installation issues, or some missing components in WSL.

To fix Windows 11’s Ubuntu errors, you first need to know what they are. Therefore, before solving them, we explain the most common ones that you can get when running it on Windows 11.

What are 0x8007003, 0x8007019e, and 0x800701bc WslRegisterDistribution Failed errors?

0x80070032 error: 0x80070032 is an error that appears when you want to upgrade WSL to the next version. This error also shows that your Virtual machine platform is disabled. 

0x8007019e error: 0x8007019e error occurs when you don’t have permission to run the command line in Linux. Just like the first error, it shows that WSL is disabled. Also, many users have reported recieving 0x8007019e when trying to install Ubuntu from Microsoft store. However, you can easily troubleshoot it by enabling components in Windows 11. We will provide you with some instructions to solve this error in the next sections.

0x800701bc error: 0x800701bc is a Linux Kernel issue when you attempt to install Ubuntu. In this case, you should download WSL2 Linux Kernel. Hopefully, Microsoft provides the latest update on WSL that you can download.

How can I fix Windows 11’s WSL Ubuntu errors? 1. Fix the 0x80070032 error

Reset Microsoft Store

As we mentioned earlier, 0x80070032 error arises from reinstalling or upgrading WSL. Therefore, we need to reset/reinstall Microsoft Store or clear its cache.

Reinstall Microsoft Store

Sometimes resetting Microsoft Store doesn’t solve this issue, and you have to reinstall Microsoft Store.

Enable Virtual Machine Platform

It is necessary to enable Virtual Machine to run WSL. When you install this feature, you can upgrade WSL without any problem.

Clear Microsoft Store cache

Open Run dialogue by holding down Windows + R keys.

Type chúng tôi then press Enter.

Expert tip:

0x8007019e error is one of the common issues. However, you have to enable the WSL feature or use Windows PowerShell to troubleshoot this problem. So, here’s how you do it.

2. Fix the 0x8007019e error

Enable WSL feature

Alternatively, you can use Windows PowerShell to enable this feature:

3. Fix the 0x800701bc error

To begin, visit this link to download the Linux kernel update package.

Once you have downloaded the kernel package, run it as an administrator.

Wait until Windows completes WSL update package installation. Then follow the on-screen instructions.

After that, open Ubuntu. Now command prompt window opens up and requests you to create a new UNIX user name and password.

Enter your desired password and username. Now let CMD finish the installation.

0x800701bc is a kernel error that you can solve by downloading the latest WSL2 Linux Kernel version. If you no longer need it, this article will show you how to uninstall WSL on Windows 11.

Why should I run Ubuntu on Windows 11?

Developers, sysadmins, and enthusiasts who work in both the Microsoft operating system and Linux worlds appreciate the convenience that Windows Subsystem for Linux provides. But WSL, as useful as it is, has been constrained by a number of limitations.

If you’ve ever tried to get graphical apps to function on WSL, you’ll know it was not always as simple as it should be, and it required a few third-party software.

However, both of these issues have been resolved in Windows 11. Ubuntu is an open-source operating system that you can run on Windows 11, but when mounting on Windows 11, you encounter Linux kernel or WSL errors.

Also, do not hesitate to read this post if you’re having trouble dual booting Ubuntu on Windows 10. Some tips may be applied by Windows 11 users too.

The most common Ubuntu error is 0x80070032 which you can solve by clearing the Microsoft Store cache.

Was this page helpful?


Start a conversation

Fixnot Working Or Recognized On Windows 11/10

The wuauclt.exe is a background process for  Windows Update AutoUpdate and its job is to check for available updates. With Automatic Updates enabled, the process will run in the background. It is also used to force Windows to check for Updates right away, using the command line.

However, according to users, chúng tôi /updatenow, /reportnow, /detectnow, etc. commands are not working on their Windows computers. In this post, we will talk about this and see what you can do if wuauclt.exe is not working or recognized on Windows.

Fix chúng tôi not working or recognized on Windows 11/10

If chúng tôi /updatenow, /reportnow, /detectnow, etc. commands are not working on Windows 11/10, follow the solutions mentioned below to resolve the issue.

Use a different network or disable Metered Connection

Run Windows Update Troubleshooter

Run chúng tôi in Clean Boot State

Repair Windows Update System Files.

Let us talk about them in detail.

1] Use a different network or disable Metered Connection

If you use a mobile hotspot and run the wuaclt command, it is very likely that Windows will not update your device. That’s because Windows consider the mobile network to be relatively slow and limited. Although sometimes, it also misidentifies a WiFi connection as that of a Mobile Hotspot. In that case, we recommend you switch to some other network. If you can’t do that, you should disable Metered Connection. Follow the steps given below to do the same.

Open Settings by Win + I.

Now, navigate to the connected network and make sure that the Metered Connection toggle is disabled.

Once done, restart your computer and run the command again. Hopefully, this time, the update will be installed.

2] Run Windows Update Troubleshooter

Windows Update Troubleshoot is a built-in Windows utility that can scan what’s scan with your update components and if something is wrong, it will apply the required fixes. In most cases, if the issue is a result of some kind of corruption running this tool does the trick. Follow the steps given below to do the same.

Windows 11: 

Open Windows Settings.

Finally, follow the on-screen instructions to complete the task.

Windows 10:

Launch Windows Settings.

Follow the on-screen instructions to do the task.

Hopefully, this will resolve the issue for you.

3] Run chúng tôi in Clean Boot State

If the Windows Update components are not corrupted but you are unable to run wuauclt, boot your computer in Clean Boot state and then try. As the name suggests, Clean Boot State opens with only essential services and programs, so, one has the option to stop every single non-Microsoft app and then run the command. We do this to check if there is a third-party application that has stopped the command. Follow the steps given below to do the same.

So, once you reboot your computer, it will open with no services that can interfere with the command. You can then run the Windows Update AutoUpdate command and check if the issue is resolved.

Read: What is MoUSOCoreWorker.exe?

4] Repair Windows Update System Files

If nothing works, we can assume that corrupted system files are causing this issue.

You have two options then:

Having done that, check if the issue is resolved.

Read: Windows Upgrade errors 8007002C, 80246007, 80070004, 80240020

Where is Wuauclt located in Windows?

Read: Make Windows repair corrupt components when pointed to WSUS

How to run Windows Update through cmd?

Also Read: How to force Windows to Update or Upgrade.

Device Encryption Not Showing Or Working In Windows 11/10

The data security concern is more apparent than ever, because of this, developers are trying to inculcate as many security features as they can. The built-in Device Encryption is one of them. However, for a lot of users, Device Encryption is not showing or working. We are going to talk about this in detail in this article.

What is Device Encryption?

Encryption is basically jumbling of your data in a format that is unreadable. So that, even if a hacker is able to fetch your data, they won’t be able to make sense of it. Device Encryption takes the data which is plaintext and then converts it into an unreadable format encryption algorithm (ciphertext). This data can only be decrypted using a password or recovery key.

Why is Device Encryption not showing or working?

Device Encryption is not showing or working on Windows 11/10 Home. As it turns out, the problem is related to Sleep and Modern Standby.

So, Microsoft, in order to tackle this issue, introduced Modern Standby. This feature enables allows your computer to quicken the transition between on and off states. Now, the problem with Modern Standby is that it doesn’t work alongside Device Encryption as it works by keeping a few apps running in the background in order to fetch it quicker. But to do that, the features need to decrypt the data that was encrypted when your computers entered the Sleep Mode. On a lot of systems, Modern Standy is missing, because of which Encryption won’t be enabled. There is also a bug that is stopping users from enabling it.

Fix Device Encryption not showing or working in Windows 11/10

If you are not able to encrypt data, go through the following suggestions.

Make sure that your computer is compatible

Update your computer

Make sure you are an administrator

Let us talk about them in detail.

1] Make sure that your computer is compatible

First and foremost, you need to make sure that your computer is compatible to encrypt data. The following are the conditions you need to match to use Device Encryption.

TPM Module 2.0 (Trusted Platform Module) with support for Modern Standby

TPM must be enabled

UEFI (Unified Extensible Firmware Interface) firmware

You can also check whether your system is compatible using the System Information app. So, search out “System Information” from the Start Menu. Once the app is launched, look for Device Encryption Support to know why your encryption is not working.

2] Update your computer

If your computer is meeting the criteria, but still Device Encryption fails to work, check if there is an update available. Since one of the reasons why you may face this problem is because of a bug, if there is a bug fix available, installing it will do the trick for you.

3] Make sure you are an administrator

You need to make sure that you are an administrator, otherwise, you won’t be able to enable Device Encryption. To check whether you are an administrator or not, follow the prescribed steps.

Open Control Panel.

If you see Administrator written under your username, you are the administrator.

If you are not using an administrator account, switch to it and then try enabling it.

Hopefully, this should do the trick for you.

How do I enable encryption in Windows 11?

Device Encryption can be enabled using the Windows Settings on a Windows 11 computer. Follow the prescribed steps to enable encryption in Windows 11.

Open Settings by Win + I.

Go to Device encryption.

Enable the toggle Device encryption.

This way your drive will be encrypted.

Read: What is the difference between Encryption and Hashing?

Does Windows 11 have Device Encryption?

Yes, Windows 11 have Device Encryption. Not just Windows 11, even Windows 10 has this feature. The importance of encryption can not be overlooked. The rise in cyber security threats is not hidden from anyone, not from Microsoft at the very least, which is a good thing. That is why they are trying to add features such as the one in question to secure their customer’s data. Your system just needs to meet some security criteria mentioned above and you will be able to enjoy a secure life.

What to do if Encryption is missing from your system?

If your computer is not meeting the criteria, you can not encrypt files. You should try the best file and folder encryption software to do the same. These are free apps and a great alternative to the Device Encryption of Windows.

Read next:

Show Desktop Not Working Or Missing In Taskbar In Windows 11/10

Show desktop missing or not working

There is no specific reason for this issue. It might have happened after updating Windows 11/10 or due to some other causes. But if you are facing such an issue, then you can try some helpful tips covered in this post.

Turn on the feature using the Settings app

Turn off Tablet mode

Restart File Explorer

Create a desktop shortcut

Re-register this DLL

Go back to the previous version

Reset Windows 11/10.

1] Turn on the feature using the Settings app Windows 11

Open Windows Settings by pressing the Windows and ‘I’ key combination

From the resultant drop-down, locate the option that says ‘Select the far corner of the taskbar to show the desktop’.

Toggle it ON.

Windows 10

It might be possible that Peek to preview the desktop option is turned off because of which you’re facing this issue. In that case, you can simply access taskbar settings in Windows 10 Settings app and turn on that option. The steps are as follows:

Open Settings app using Winkey+I hotkey or Search box

Select Personalization category

Select Taskbar page

Turn on Use Peek to Preview the desktop…. option available in the right section.

Now place the mouse cursor on the Show desktop button. It should help you peek at the desktop.

2] Turn off Tablet mode

Windows 10 not showing desktop error may also occur if Tablet mode is turned on. So, you need to turn it off using the following steps:

If you are stuck in Tablet mode and not able to turn it off using this method, then you can check other ways to turn off Tablet mode in Windows 10.

Bonus Tip: You can also use Winkey+D hotkey to show the desktop.

3] Restart File Explorer

You might have noticed that sometimes the Start menu, Taskbar, or other applications become unresponsive, and restarting File Explorer (or Windows Explorer) helps in fixing that problem. The same might also work to make the Show desktop button work again. So, try to restart File Explorer and see if the problem is fixed.

4]  Create a desktop shortcut

Create a new shortcut using this for Path and pin it to the taskbar:

explorer.exe shell:::{3080F90D-D7AD-11D9-BD98-0000947B0257} 5] Re-register this DLL

If Aero Peek is not working, open Taskbar settings and ensure that the Use Peek to preview the desktop etc… setting is set to the On position.

Re-register the concerned DLL file by using the following command and see if that works for you:

regsvr32 /i shell32.dll

Restart PC and check.

6] Go back to the previous version of Windows 11/10

Like we mentioned earlier, this Show desktop, not working issue might also occur after updating Windows 11/10. In this case, you can go back to the previous version of Windows.

However, this option is available only if the chúng tôi folder (that contains a copy of the previous version or build of Windows) is present in your PC and your PC was updated less than 10 days ago.

7] Reset Windows 11/10

Another option to resolve show desktop error is reset Windows 11/10. Before you reset your PC, you also have the option to remove all apps and settings and keep your files or remove everything, including your personal files.

How do I get the Show desktop button back on the Taskbar in Windows 11? How do I fix my desktop icons not showing in Windows 11?

If you cannot find icons on the desktop, you need to check the Desktop Icon Settings panel first. Following that, you can open the Task Manager and restart the Windows Explorer process. Also, it could help if you could rebuild the icon cache on your Windows 11 PC.

That’s all!

Some users are benefitted using the options mentioned above. I hope something will help you as well.

Update the detailed information about Batteryreport Not Working, Fails With Unexpected Errors 0X422, 0Xb7 Or 0X10D2 On Windows 11/10 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!